Detailing Thread [For Newbies][continued]

[weszt]

I don't know if Elevo's available there in SG but im sure its available here, someone told me Elevo is a local brand for some retail company, im just not sure on that information

Yep so far so good with Microtex Tireblack

Haha for swirls and correction you really have to work the polish for a long time and for me and in most cases thats at least 12 passes hehe, with finishing polishes i could even go for more than 20 passes just to work them properly and produce a hologram free finish

as for those products, since they're a bit expensive i would suggest you just apply them by hand you kinda save more with hand application and the difference with machine application doesn't vary that much

SG SRP at most 2 passes only

wow tireblack that can be used on plastics trims, medyo namumuti na din kasi ung ibang plastics sa exterior.... napabayaan na.

yup that's my mistake, i did not work the polish for a long time. waaahhh maybe that's why im not satisfied on the shine n my car? next time ill try the 20 passes. 3-4 settings...hehe


ah ok i thought its better to apply ag srp/m21/ and next gen 2.0 by ROP because you've mentioned that my ROP is way better than a PC when it comes on applying glazes. better to stick on hand application...


how do we properly apply elovo on the windshield? with ease...


1. clean with carshampoo?
2. clay
3. clean again?
4. apply elovo
5. apply carlack 68/diamondite sealant?


and finally how do i remove this stubborn dirt around the emblem... its very hard to remove....

[jmpet626]

for me the best rotary is Makita 9227c its lighter and a lot less noisy than the BnD, it costs around 10.5k to 11k but its well worth it, BnD on the other hand goes up to 4.3k if its with the backing plate, this is the best value by far, don't settle for cheaper brands, i used a JAC and it busted out on my in less than 6 months and just about the time the warranty expires, BnD offers 2 years warranty if you are sensitive about those things, Makita 9227c on the other hand offers lifetime service warranty but none on parts, but there's a reason why nearly every professional detailer and dealerships opt for the Makita, basically they last a long long time, by friends Makita lasted for 9 years of daily use, he only had to replace the carbon brush twice which costs less than 300 for both instances

Yup medyo mabigat yung bnd after ilang hours pagod ka na. Kung personal use lang naman i think ok naman siya budget ng 5k to 6k for a set of pads and backing plate.

[Chikselog]

*weszt
Sa emblem, degriming na yan sir.

Cleaner wax lagay ka sa isang cotton bud, then tirahin mo yung emblem. Kapag heavy grime na, polish na yan IMO.

*madkatz
Di ba ang SwirlX pwede rin by hand? Mukhang mapapabili na ako eh hehe malapit na kasi deadline nung contest ko sa Blade. Sana 1st place!

OT:
Pa plug lang dito. Anybody who has a facebook account please bear with me hehe. May sinalihan po akong contest sa Blade Auto Center fan page sa facebook it's basically you send a photo to them of your car with the blade sticker and the photo with the most number of "Like" wins.

August 31 is the deadline of voting so please vote for my entry! Kapag nanalo, P5000 Gift Check from Blade ang matatanggap ko. That's a lot of detailing items hahaha.

Please DO LIKE/Click the LIKE button on the following:

Blade Auto Center fan page found on this link:
http://www.facebook.com/pages/Blade-...0564568?ref=ts

And my entry of course in this link! (Honda Civic image)
http://www.facebook.com/photo.php?pi...0564568&ref=mf

Thanks!

[weszt]

*weszt
Sa emblem, degriming na yan sir.

Cleaner wax lagay ka sa isang cotton bud, then tirahin mo yung emblem. Kapag heavy grime na, polish na yan IMO.

*madkatz
Di ba ang SwirlX pwede rin by hand? Mukhang mapapabili na ako eh hehe malapit na kasi deadline nung contest ko sa Blade. Sana 1st place!

OT:
Pa plug lang dito. Anybody who has a facebook account please bear with me hehe. May sinalihan po akong contest sa Blade Auto Center fan page sa facebook it's basically you send a photo to them of your car with the blade sticker and the photo with the most number of "Like" wins.

August 31 is the deadline of voting so please vote for my entry! Kapag nanalo, P5000 Gift Check from Blade ang matatanggap ko. That's a lot of detailing items hahaha.

Please DO LIKE/Click the LIKE button on the following:

Blade Auto Center fan page found on this link:
http://www.facebook.com/pages/Blade-...0564568?ref=ts

And my entry of course in this link! (Honda Civic image)
http://www.facebook.com/photo.php?pi...0564568&ref=mf

Thanks!

*chikselog

sir paano po pag heavy grimme na? what to do?hehehe

naka like n po ako sa civic nyo.. kaya pa yan ang dami nmin sa tsikot!

[Chikselog]

Salamat po sa mga nag-like hahaha.

*sir weszt
Sir ang tinuro po sa amin ni sir Edwin is 1st step yung cleaner wax, lagay sa cotton buds then pahid sa grime.

Tapos 2nd step polish naman lagay din sa cotton bud and spread it only sa grime. (I think Megs #66 (?) Quick Detailer ang ginamit namin noon)

Then get a bamboo stick similar to what you use sa Banana-Q. Tapos get a cutter, patalasin nyo po yung tip niya.

Then very very lightly kuskusin nyo po yung grime na nilagyan nyo ng polish. No pressure, yung tama lang para dumikit yung bamboo stick sa grimed part ng paint. Medyo nakakainip po ito at nakaka-frustrate minsan hahaha! Patience ang kailangan sa degriming. Hehe.

Eto po pics ng degriming namin nung 1st detailing seminar EB.




On the 2nd image, I think yung ketchup bottle ang laman noon yung Megs #66.

[indiej]

thanks madkatz. they say the fake one do have a thinner wire and noisy and the insides spark and easily heats up.

is it ok to mention a name of a reputable shop for makita 9227c? i walked the length of t. alonzo when i was there but was met with heavy rain so i promptly went home wet and tired.

[kafph2000]

*weszt

OT:
Pa plug lang dito. Anybody who has a facebook account please bear with me hehe. May sinalihan po akong contest sa Blade Auto Center fan page sa facebook it's basically you send a photo to them of your car with the blade sticker and the photo with the most number of "Like" wins.

Thanks!

Sure win na yan pre. hehehe, nag-like narin ako! Pa-spot ng quik detailer ah wahahaha

[Chikselog]

Share share tayo mga sir sa detailing EB natin hahaha!

[weszt]

Salamat po sa mga nag-like hahaha.

*sir weszt
Sir ang tinuro po sa amin ni sir Edwin is 1st step yung cleaner wax, lagay sa cotton buds then pahid sa grime.

Tapos 2nd step polish naman lagay din sa cotton bud and spread it only sa grime. (I think Megs #66 (?) Quick Detailer ang ginamit namin noon)

Then get a bamboo stick similar to what you use sa Banana-Q. Tapos get a cutter, patalasin nyo po yung tip niya.

Then very very lightly kuskusin nyo po yung grime na nilagyan nyo ng polish. No pressure, yung tama lang para dumikit yung bamboo stick sa grimed part ng paint. Medyo nakakainip po ito at nakaka-frustrate minsan hahaha! Patience ang kailangan sa degriming. Hehe.

Eto po pics ng degriming namin nung 1st detailing seminar EB.




On the 2nd image, I think yung ketchup bottle ang laman noon yung Megs #66.

*chikselog

ibig sabihin po lagay ko yung cutter sa banana Q stick then dahan dahan tanggalin?


can i use UC or megs rubbing compund? what do you mean na QD ng megs lang po nilagay nyo?

gaano po katagal kuskusin ng cleaner wax at megs 66 or maybe uc/megs rubbing compund?

ilang hours nyo po ginawa yung sa inyo?


panalo na po yun sir 1st place pala kayo eh... vote po tayo!

[Chikselog]

Parang tatasahan nyo po yung BBQ stick para maging matulis yung tip.

Megs 66 Quick Detailer po yung name mismo ng polish.

Depende po kung gaano kakapal yung grime eh hehe. Pero matagal po talaga ang working time.

Hehe humahabol po yung 2nd and 3rd placer eh. So ayoko muna maging kampante hehehe!