2010 Mitsubishi ASX Crossover

[Noel Salisipan]

No idea bro. But my car's oil filter is being changed the same time as the oil change happens. If you are using synthetic oil, which i am also using, the PM schedule should always be every 10k, after the 1k PM. The oil filter is still good even after 10k as what my service technician showed to me during my last 20k PM. This is also true with other car brand because I used to own a Toyota RAV4 and a CRV and this is the same PM frequency that is being followed. But if you are not using non synthetic or mineral based oil, then the casa will requier you to have a 5k frequency PM sched.

I will clarify this to Casa. Yun nga rin ang alam ko kaya lang di na ko nagbusisi nung 5k ko kung bakit ganun.

Thanks for the heads-up Bro Larry!

BTW, san ka pala huling nagpa-PMS, anong dealer din yun, kung may contact # ka nila e hingin ko na rin.

Thanks.

[larry0609]

I will clarify this to Casa. Yun nga rin ang alam ko kaya lang di na ko nagbusisi nung 5k ko kung bakit ganun.

Thanks for the heads-up Bro Larry!

BTW, san ka pala huling nagpa-PMS, anong dealer din yun, kung may contact # ka nila e hingin ko na rin.

Thanks.

I always have my car's PM done at Diamond Motors in Marcos Highway, Cainta. Don't have their number but you can easily get it from the internet as they have their own website.

[Noel Salisipan]

I always have my car's PM done at Diamond Motors in Marcos Highway, Cainta. Don't have their number but you can easily get it from the internet as they have their own website.

Thanks Larry.

I can tell them (Motorplaza-Dagupan) about Diamond motors PMS.

[Bi2212]

Finally got our red asx yesterday. What gasoline do you suggest? First time car owner right here.

[ghosthunter]

Finally got our red asx yesterday. What gasoline do you suggest? First time car owner right here.

Any gasoline would do just fine in the ASX. I have used 93 octane without problems.

[sole_gemini]

Hi guys. May nagpapintura nb ng stock rims dito?

[dg1110]

Hi guys. May nagpapintura nb ng stock rims dito?

Was planning to paint it black or gun metal sana... Gayahin ko kasi yung sa ASX Black pero nag end up napabili na lang ako ng new rims. Hehehe.

[Noel Salisipan]

Was planning to paint it black or gun metal sana... Gayahin ko kasi yung sa ASX Black pero nag end up napabili na lang ako ng new rims. Hehehe.

Plano ko rin yan bro.
Pero nung ina-analyze ko na sya, tingin ko mabusisi.

Para mas maayos ang pagpintura, mas maganda kung ihihiwalay ang rubber sa mag. Then possible na wheel balansing pag ibabalik.

Kung maayos man ang pintura ay swerte kung abutin ng isang taon na ganun pa rin kaganda yung repaint. So,, ulit na naman ang proseso.

Finally, sulitin ko muna yung stock at later ko na lang mag-upgrade ng mga gulong. Since mahirap ding hanapin hanggang ngayon yung stock na gulong.

[ghosthunter]

Plano ko rin yan bro.
Pero nung ina-analyze ko na sya, tingin ko mabusisi.

Para mas maayos ang pagpintura, mas maganda kung ihihiwalay ang rubber sa mag. Then possible na wheel balansing pag ibabalik.

Kung maayos man ang pintura ay swerte kung abutin ng isang taon na ganun pa rin kaganda yung repaint. So,, ulit na naman ang proseso.

Finally, sulitin ko muna yung stock at later ko na lang mag-upgrade ng mga gulong. Since mahirap ding hanapin hanggang ngayon yung stock na gulong.

For best durability, you will need to have the wheels powder coated. I was planning to have my wheels powder coated to a dark grey or gun-metal color finish. But I got lazy and simply used the GTA wheels as-is. I might still have the wheels powder coated but not in the immediate future.

[Noel Salisipan]

For best durability, you will need to have the wheels powder coated. I was planning to have my wheels powder coated to a dark grey or gun-metal color finish. But I got lazy and simply used the GTA wheels as-is. I might still have the wheels powder coated but not in the immediate future.

Thanks for the suggestion sir GH.
Me too, not in the immediate future. Susulitin ko muna yung stock na gulong at mags.