Mazda B-Series (B2200/B2500)

**pickupbike** · June 18th, 2011 06:32 PM

*sir azzkkr: sa akin sir basta kung kelan nyo finalize, any date pupunta ako. sana nga EB na soon!

regards,
pickupbike

**azzkkr2600** · June 21st, 2011 12:11 PM

hintay muna tayo na lumipas ang mga bagyo.. ano balak nyo mga sirs?

any new upgrades / mods made to your truck/s? ako LED tails [bulbs] by end of this month. hehe.

**duskylim** · June 22nd, 2011 08:56 PM

Originally Posted by azzkkr2600

July 2 [Sat] or 3 [Sun] EB?

Sir Ronn:

I vote for Sunday July 3.

LPG mod update - have to check out my piping... there's a bad leak and now all my LPG is GONE!

Also - it seems I will need to change the LPG injector - its too undersized.

Regards,

Dusky Lim

P.S. - Keep on Trucking!

**Yongzkie** · June 23rd, 2011 11:58 PM

Hi gudpm mga parekoy greetings from Surigao City, thanx at last nakapasok narin sa internet hehehe. BTW, ask lang po ng advise at suggestion kasi i'm planning to replace my brake system (hydrovac & brake master) kasi nagloloko ang tisoy ko (mazda b2500)..we tried so hard para maayos ang brake ko lahat na ng paraan ginawa na ng mekaniko ko ngunit napunta sa wala rin kaya i decided to replace the whole mechanism/assembly ng brake system ko kaya ito ako naghihingi ng tulong sa mga parekoy ( bseries owners) ko dyan na alam kung handang magbigay ng mga suggestions o advise kung anong klaseng assembly/mechanism (1set) na pwdeng makabit at match sa original na butas at measurement ng b2500. Salamat po mga parekoy. God bless.

Regards,

Yongzkie from Surigao City.

**duskylim** · June 28th, 2011 10:50 AM

Hi Yongzkie:

Welcome back!

When I had problems with my B2500's brakes I replaced the whole assembly with complete units and stopped using repair kits.

Luckily here in Manila there are replacement parts for the brake master, slave cylinders and disc calipers as well as clutch master and slaves.

I have NO occasion to replace my hydrovac so I don't know what the back looks like.

I believe Ronn does however...... calling Ronn!!!

Best Regards,

Dusky Lim

**life2enjoi** · June 30th, 2011 05:38 PM

yongzkie pinalitan ko un hydrovac ko kahit ano pwede basta 4 ang butas. dami sa evangelista nasa 1500 to 2k kasama na master cycliner.

hello po sa lahat tanong po ano magandang palit sa alternator ko. panget na klase daw un nakalagay sakin kaya hirap mag start. kelangan daw ic type na 65 to 70amp or taasan ko pa?

thanks

**azzkkr2600** · July 2nd, 2011 09:13 AM

a friend of mine recommended the hydro & brake master of a landcruiser LC 80 series. nasa P3500 yata ito.

*life2enjoi: sir, you may want to thoroughly check your electrical system / wirings first before you decide to change the alternator. madami kasing pwedeng panggalingan yan like: old battery / low battery CCA, loose or inadequate grounding, or kulang ang current na napupunta sa starter [at dapat lagyan ng fuse para mabuo yun 12.8V needed to properly crank the starter/engine].

**life2enjoi** · July 3rd, 2011 02:04 PM

nde kse ic type un alternator ko. sabi nun mechanic palitan ko na daw ng ic para nde manual na nag aadjust para makakuha ng 12.8v.

**azzkkr2600** · July 5th, 2011 11:15 PM

not sure about that sir. you can ask the Autorama Parts in banawe qc. they sell OEM mazda truck parts.

EB na!!

**azzkkr2600** · July 5th, 2011 11:29 PM

recently had my truck's taillamp bulbs replaced with hi-power red LED and boy they're so bright! planning to replace the turn signal & backup soon. LED also has low elec consumption and does not heat up your plastic lenses! get yours now!