Wiper

[jaggerx3]

Yung akin nag iiskip, ano maganda gawin?

[rodetor]

Up ko lang to. Dahil umuulan na. Pansin ko na nagssqueak ang wiper ko. Newly replaced sya. Hindi naman nagsskip. Nagssqueak lang yung sa lower part sa driver side. Anong pwedeng gawin dito? Thanks

Sa windshield ba yun squeak nya? O sa wiper linkage bushing? Kung sa windshield, linisin mo lang mabuti yun glass nang winshield, a dishwashing liquid soap will do, at syempre, rinse it. Kung sa wiper linkage bushing ang squeak, wd-40 lang, spray it on that bushing area, let it soak. Then try to test run your wipers. Observe if it will still squeak.

Sent from my UP+ using Tapatalk

[rodetor]

Upon further observation...nagsskip pala sya pero dun lang talaga sa lower part ng driver side.
If windshield washer sir, di kaya quick fix Lang to? So I need to spray always kung maulan?

Your wiper linkage bushing, where the wiper arm connected, might be in wear condition na, kumbaga, may alog galaw na yun spindle sa bushing, kaya nai-skid. Kung hindi man, at mali ako, maari kailangan lang ng lubrication. Kasi sa kadalasan pag-uulan at naa-agusan ng gabok tangay ng tubig ulan. Nai-i-stuck up yun dumi sa pivot bushing ng linkage. Kaya nahihirapan i-swing at nai-skip sa pag-sway ng wiper arm blades.

Sent from my UP+ using Tapatalk

[sphinxz]

Concentrated yan, 150ml nasa P78 or P75 ata, good for 15liters na. Matagal naman gamitin. Next time try mo NWB with graphite. Mas maganda yun based sa experience ko.

- - - - - - - - - - - - - - - - - - - - - -



Concentrated yan, 150ml nasa P78 or P75 ata, good for 15liters na. Matagal naman gamitin. Next time try mo NWB with graphite. Mas maganda yun based sa experience ko.

Sir, San ko mabibili to locally? Salamat

[sphinxz]

Your wiper linkage bushing, where the wiper arm connected, might be in wear condition na, kumbaga, may alog galaw na yun spindle sa bushing, kaya nai-skid. Kung hindi man, at mali ako, maari kailangan lang ng lubrication. Kasi sa kadalasan pag-uulan at naa-agusan ng gabok tangay ng tubig ulan. Nai-i-stuck up yun dumi sa pivot bushing ng linkage. Kaya nahihirapan i-swing at nai-skip sa pag-sway ng wiper arm blades.

Sent from my UP+ using Tapatalk

OK naman po ang wiper arm assembly. Ang duda ko is yung windshield. Squeaky clean po kasi sya. When I slide sa area na nawiwipean eh nagssqueak while yung area na di abot ng wiper eh mejo lubricated kasi smooth, di nagssqueak.

[sphinxz]

Sir, San ko mabibili to locally? Salamat

Nakabili na ako kanina sir sa handyman. 75 pesos. Will try this out tomorrow.

[sphinxz]

update lang. i already used the waxco wiper wash in my reservoir but still nandun pa rin ang skipping/squeaking ng lower part ng driver's wiper (after ma-wash out ng rain ang wiper wash).
i have also tried the auto gard glass cleaner and same din, nawawala ang squeaking for a while pero bumabalik din. tried alcohol cleaning sa new wiper blades, and cleaning the windshield.
ano kaya ang pwede ko pang gawin? :| standard size naman ng wiper ang gamit ko.

[sphinxz]

Solved. Turns out my "new" wiper is too hard. Mahaba habang observation pero Hindi nagbebend ang blade kapga pababa ang hagod at dun sya nagssqueak. Ended up reviving the stock wiper and with thorough cleaning works like new ulit. Look ma, no squeaks. But until when, I don't know. Hehe. Next step, paano palambutin ang new wiper. Thanks

[ninjababez]

El cheapo wipers
50 php each hehehe

Wiper sale ...

[sphinxz]

Saang branch sir? Mas mura PA kesa wiper wash. Haha