Slex rfid

[Archerfish]

i dont think you can reuse tints bro

Sent from my MI MAX 3 using Tapatalk

Yes, you can't reinstall it. What I meant is, I ask them to remove the old tint then install the RFID before the new tint.

At the very least, the warranty for the tint is not voided.

[kai s.]

Ang lagi ko naririnig, lahat ng V-kool, kelangan butasan, to work properly.

Pag 3M, it depends yata what kind.

The ordinary 3M's, no problem.

Di kelangan mag-butas.

May tester naman.

At pwede sila mag-butas for you, just sign a waiver.

Yung sakin, narinig lang na Vkool, hindi na considered at all yung windshield strip. Automatic headlight na agad haha

[gromek]

Ang lagi ko naririnig, lahat ng V-kool, kelangan butasan, to work properly.

Pag 3M, it depends yata what kind.

The ordinary 3M's, no problem.

Di kelangan mag-butas.

May tester naman.

At pwede sila mag-butas for you, just sign a waiver.

That's my experience rin sir. Sa Mazda 3 namin na naka-3M, windshield rfid yung sa SLEX tapos headlight sa CAVITEX.

Sa Everest namin na naka-VKool, talagang headlight rfid pareho.

Sent from my RNE-L22 using Tapatalk

[im.ben]

What could be the type of tint should be installed for RFID to work properly? I am hesitant to install a new one because of this.

Sunbloc Non Plus Ultra Ceramic Tint. Installed RFID in my windhshield without any issues. They have this 'barcode gun' to check if it can read the sticker before installing it.

Sent from my LG-H860 using Tapatalk

[Archerfish]

That's my experience rin sir. Sa Mazda 3 namin na naka-3M, windshield rfid yung sa SLEX tapos headlight sa CAVITEX.

Sa Everest namin na naka-VKool, talagang headlight rfid pareho.

Sent from my RNE-L22 using Tapatalk

I thought it is possible to have a single RFID for NLEX-SCTEX-Cavitex.




So far, the tried and tested tint brands and types that work with RFID are:

Sunbloc Non Plus Ultra Ceramic Tint.

Bro- iyong 3M ko na neutral, okay lahat ang RFID sa windshield....

[remzam]

I thought it is possible to have a single RFID for NLEX-SCTEX-Cavitex.




So far, the tried and tested tint brands and types that work with RFID are:

Possible to have one RFID sticker. But still two separate accounts. The slex autosweep RFID sticker can be registered for NLEX / Cavitex pero you still maintain two separate accounts. Magkaiba may ari. Magkaibang piggy bank.

Sana maisip nila katulad ng credit or debit card. Kahit na anong klaseng card, pwede sa POS tapos reconciliation na lang sa accounting system ng different expressways.

Sent from my ONEPLUS A3000 using Tapatalk

[absinthe]

Speaking of RFID, dumaan ako sa STAR nung weekend, nadetect sa Sambat at Sto Tomas...

...pero as usual, nganga na naman sa SLEx.

(merong light 3M tint, eh sabi nung naginstall sa Sta. Rosa years ago, pwede naman daw, olats pala. Tapos kung papalitan ay request letter tapos bayad 200. Nyek.)

[kunanteng]

WHat other options for reloading the Autosweep/Slex RFID account is currently available online?

I know chinabank online has one, but im not too keen on opening a bank account from them just for the RFID.

Sa 7-11 or Paymaya ako nag reload ng rfid and easytrip.
Badtrip lang nung minsan sa papuntang NAIA confiscated yung RFID card ko kasi daw below P100 ang load. Kunin ko daw sa bicutan yung card after 7 days. Hindi ko na kinuha. Waste of time. Alam ko naman account number.

[CVT]

I thought it is possible to have a single RFID for NLEX-SCTEX-Cavitex

It is possible bro.

That is my current setup.. including SLEX and NAIAX. I understand the list includes STAR now...

That is just his preference...

[Archerfish]

It is possible bro.

That is my current setup.. including SLEX and NAIAX. I understand the list includes STAR now...

That is just his preference...

That is good to know. Thanks!