Toyota Corolla 11th Generation Altis [Merged Threads]

[temabs]

Wala ba talagang sound yung door lock and unlock? Di sya pwedeng lagyan kahit yung horn lang?

[tevilo]

Try deactivating #3 and activating #4. That's the closest to unlock after engine off that we can get.

#3 is the speed linked function tama ba? #2 yung ginawa ko which is shift position linked.

Okay din ung #4 kaso medyo matagal ung 45 seconds interval to unlock the passenger doors. Have you tried using both shift position and driver door linked functions?

[_Cathy_]

Oh, don't shift to "N" after turning the key to the the "ON" position.
Keep the shifter in "P", then press and hold lock for 5 secs. This is for the door locking.

Holding unlock is for the door unlock function.

It worked! Finally!!! :cheer3: Inabot na ko ng 12 am. Hindi ko tinigilan

Thanks sir

Are you trying to disable/enable the speed sensing lock? "N" and lock for 5 seconds is for the speed sensing lock. Is the key turned to "ON" too?
Just checking lang ha. But that's strange.
I wasn't able to do this manually too the first few times. When I got it right, it becomes easy na.

I was too impatient lang pala. After several tries I did it

Asar na asar talaga ako since last night dahil akala ko pati locking ng car ko lemon

[shok]

Yes. #3 is locking when 25kph is reached. #2 is unlock as soon as you shift into "P". #1 is locking as soon as you move out of "P". #4 is unlocking all the doors at the same time as you unlock the driver side door using the inner door handle within 30s of shutting down the engine. All of these are independent of each other, meaning you can have none to 4 functions active at the same time. But #2 and #4 is redundant on AT because you normally shift to park before ignition off. However, #4 is useful for MT.

[_Cathy_]

Yes. #3 is locking when 25kph is reached. #2 is unlock as soon as you shift into "P". #1 is locking as soon as you move out of "P". #4 is unlocking all the doors at the same time as you unlock the driver side door using the inner door handle within 30s of shutting down the engine. All of these are independent of each other, meaning you can have none to 4 functions active at the same time. But #2 and #4 is redundant on AT because you normally shift to park before ignition off. However, #4 is useful for MT.

I wonder if I can do this with my 10th gen altis.

Are there other functions I can activate for the 11th gen?

[shok]

I wonder if I can do this with my 10th gen altis.

Are there other functions I can activate for the 11th gen?

Not sure with the 10th gen. There are some other customizations for lighting, alarms, a/c and trunk opener modes depending on variant, but you would need Techstream to access all.

[shok]

It worked! Finally!!! :cheer3: Inabot na ko ng 12 am. Hindi ko tinigilan

Thanks sir



I was too impatient lang pala. After several tries I did it

Asar na asar talaga ako since last night dahil akala ko pati locking ng car ko lemon

Good it worked na! You can also activate #2 which locks your car as soon as you move out of park. The #3 is just redundancy in case you manually unlocked the doors when not in "P".

[_Cathy_]

Not sure with the 10th gen. There are some other customizations for lighting, alarms, a/c and trunk opener modes depending on variant, but you would need Techstream to access all.

I have the 1.6 G W. What is Techstream?

Good it worked na! You can also activate #2 which locks your car as soon as you move out of park. The #3 is just redundancy in case you manually unlocked the doors when not in "P".

Yes I activated 1 and 2. I am kinda excited to drive my car now :bwahaha: The speed sensing lock was already activated when I got the car.

[halowan]

Good it worked na! You can also activate #2 which locks your car as soon as you move out of park.

Tried this one. Thanks!

[shok]

I have the 1.6 G W. What is Techstream?

Techstream/GTS is a Toyota specific diagnostic tool used by the dealers. It has a special cable to connect to the OBD port of the car. But, you can buy bootleg copies that you install on your laptop. It is normally bundled with a Mini VCI cable.