Welcome to all owners of Toyota Fortuner [continued]

**hdj80** · December 28th, 2019 01:00 AM

Here’s some pics of my new fortuner G with the KS LEDs in the projectors.

**StockEngine** · December 28th, 2019 02:25 AM

that adjustment is not good. you will get the fury of other drivers and pedestrians.

**hdj80** · December 28th, 2019 11:46 AM

Originally Posted by StockEngine

that adjustment is not good. you will get the fury of other drivers and pedestrians.

Whats funny is that what you see is the factory headlight adjustment. They intentionally made it higher than normal to compensate for the very weak throw of the stock halogen bulbs.

Already adjusted the aim a few degrees lower since its using LEDs.

Sent from my iPhone using Tapatalk

**dr. d** · December 28th, 2019 11:59 AM

Originally Posted by hdj80

Whats funny is that what you see is the factory headlight adjustment. They intentionally made it higher than normal to compensate for the very weak throw of the stock halogen bulbs.

Already adjusted the aim a few degrees lower since its using LEDs.

Sent from my iPhone using Tapatalk

parang masyadong mataas.
the low beam throw appears almost horizontal.
i lowered my innova's factory setting, as i found the low beam "too horizontal".
i also adjusted the left headlight to veer slightly to the right.
.

**hdj80** · December 28th, 2019 12:00 PM

Originally Posted by dr. d

too much stray light, in my opinion.
is it possible, your headlight housing is not designed for LED?

Its a projector housing and not reflector so it should be fine. I checked cutoff at 25 ft and it seemed ok

Sent from my iPhone using Tapatalk

**dr. d** · December 28th, 2019 12:04 PM

Originally Posted by hdj80

Its a projector housing and not reflector so it should be fine. I checked cutoff at 25 ft and it seemed ok

Sent from my iPhone using Tapatalk

let's wait for the results of actual road test.
...if the oncoming motorists are all blinking their hi beams at you.

**hdj80** · December 28th, 2019 12:58 PM

Originally Posted by dr. d

let's wait for the results of actual road test.
...if the oncoming motorists are all blinking their hi beams at you.

Well 2 days already, so far no one has flashed me yet. Already adjusted it a few degrees lower than stock when i got home after install.

Sent from my iPhone using Tapatalk

**hdj80** · December 28th, 2019 01:01 PM

Originally Posted by dr. d

parang masyadong mataas.
the low beam throw appears almost horizontal.
i lowered my innova's factory setting, as i found the low beam "too horizontal".
i also adjusted the left headlight to veer slightly to the right.
.

The stock beam height is too high right? Thats a weird thing with the new toyotas. Taas ng aim ng lights.

Sent from my iPhone using Tapatalk

**johann123** · December 28th, 2019 01:10 PM

Originally Posted by hdj80

The stock beam height is too high right? Thats a weird thing with the new toyotas. Taas ng aim ng lights.

Sent from my iPhone using Tapatalk

Yes. Lalo yung mga new innova's. Ang taas ng ilaw ng low beam [emoji23] Napipitikan ko tuloy ng hi beam. Mas maganda stock beam height ng previous gen ng innova. Madali pang i adjust.

Sent from my Redmi Note 5 using Tapatalk

**dr. d** · December 28th, 2019 01:15 PM

Originally Posted by johann123

Yes. Lalo yung mga new innova's. Ang taas ng ilaw ng low beam [emoji23] Napipitikan ko tuloy ng hi beam. Mas maganda stock beam height ng previous gen ng innova. Madali pang i adjust.

Sent from my Redmi Note 5 using Tapatalk

mahirap na ba mag-adjust ng headlights ng new innova?

FYI and OT,
to those who replaced their older innovas' headlights with non-casa,
yes, the adjusting screws work. one just has to screw them a lot lot more, for the beams to move.
how lot more?
"if i were rolling a wooden dowel between my palms and not a screwdriver, i would have created fire."