Nanginginig ang manibela....

**van_wilder** · January 24th, 2005 12:09 AM

servitek 575 and alignment tapos 600 camber per side... not necessarily two sides icamber kaso 15days lang ang warranty

**boybi** · January 24th, 2005 12:23 AM

kung nanginginig lang kapag inapakan ang brake, hindi camber ang may problema.

**non-vtec** · January 24th, 2005 01:29 AM

pa check mo na din yung rotors mo baka warped na and di na kaya i-reface. in my case naman, di na pwede i-reface yung rotors dahil manipis na, pero wala naman wiggle when i step on the brakes.

**CLAVEL3699** · January 24th, 2005 09:51 AM

Originally Posted by non-vtec

banawe, sa tabi ng nihhon, adjacent to jetcar. 800-900 yata if i remember it right. thats camber + alignment na.

bossing hinanap ko sya last sunday di ko nakita.

Saan banda ba yun sa QUezon ave papuntang e rod or Quezon ave papuntang del monte?

**CLAVEL3699** · January 24th, 2005 09:55 AM

kailangan ko na din kasi pa camber -30 na daw yung kaliwa ko nun eh

**non-vtec** · January 24th, 2005 12:17 PM

sir,

sarado po sila tuwing sunday. its from quezon ave heading towards del monte. ever car check center. corner siya so madali makita...

**CLAVEL3699** · January 24th, 2005 12:40 PM

Thank you po sir.

**catgreg2k2** · February 7th, 2005 04:55 PM

guys, yung sa akin naman pagpatak ng 90KPH or above eh nanginginig na ang manibela, bago tie-rod and rack-ends ko. Pinagawa ko sa Fussion R and napa-camber align and wheel align ko na rin pero ganun pa rin po. Ano po kaya problema nito?

**yebo** · February 7th, 2005 04:59 PM

wheel balancing

**CLAVEL3699** · February 7th, 2005 05:36 PM

Originally Posted by non-vtec

sir,

sarado po sila tuwing sunday. its from quezon ave heading towards del monte. ever car check center. corner siya so madali makita...

Pinacheck ko na po dun, saka check din nila rotor ko ok naman po sya.

Pacamber ko po sya. press nila spindle ko kaso ang malas naman naputol, ayun bili nang surplus hati kami nung mekaniko kasi sya daw bayad nun

tama ba ginawa ko or mali.