Results 1,051 to 1,060 of 1313
-
Verified Tsikot Member
- Join Date
- Dec 2009
- Posts
- 82
February 28th, 2010 02:47 PM #1051My loan will be handled by BPI Family which I think has the lowest interest rate in the industry (hence the 30.8% interest I think). My first choice is the Infra Red color then match it with dark tints. Although my SA showed me the other color variants and I took a liking to the white one. It was kind of funny since the color samples he was showing me was from flooded units that are still pending for repairs in their garage..and there were dozens.
-
Verified Tsikot Member
- Join Date
- Dec 2008
- Posts
- 41
June 8th, 2010 12:52 PM #1052guys how much will it cost me if pinagawa ko ito sa casa?
bumangga kasi sa gutter. so lumuwag yung bumber ko. ;(
-
Verified Tsikot Member
- Join Date
- Dec 2008
- Posts
- 41
June 8th, 2010 04:03 PM #1053nag inquire ako dito sa loob ng bf homes and they charging me 2.5k for the repair and repaint. is it worth it? gusto malaman presyo ng casa. but my friend says that casa will just replace the whole bumper with a new one. how much naman kaya new bumper?
-
Verified Tsikot Member
- Join Date
- Jun 2003
- Posts
- 21
June 9th, 2010 10:06 AM #1054Hello Mazda3 owners. chi888 here, hope you guys can join & register at Mazdatech Philippines. please go to www.mazdatech.org/community for our forum. Hope you can join our monthly GEBs/FRs and make mazdatech your new home. see you there.
chiboy_d_goodboy
MTP Trustee
www.mazdatech.org/community
"The club for owners of mazda and mazda based vehicles"
-
Tsikoteer
- Join Date
- Jan 2007
- Posts
- 4,459
-
Verified Tsikot Member
- Join Date
- Jun 2010
- Posts
- 27
June 28th, 2010 12:05 AM #1056Good day mga boss, bago lang ako dito, pero I have been reading the threads these past few weeks. I just want some suggestions from you guys. I am planning to buy a new car kasi, ang choice ko is Mazda 3, at first akala ko ung binebenta na ditong 2010 model is yung naka smile. Pero nalaman ko na ung 1st generation pa din pala ung binebenta dito. Ngaun I asked the Mazda SA and according to them, sa 2012 pa daw ang dating dito nung naka smile. So I was wondering if its still a good idea to buy the current model, kasi iniisip ko, sayang naman ung pagbili ko then after 1 or 2 years, lalabas na yung bago. Pero I cant wait 1 or 2 years naman to buy a new car. So my relative suggested that I buy the Mazda 2 instead, kasi bago lng siyang labas dito. What do you guys think? Thanks in Advance!
-
June 28th, 2010 03:19 AM #1057
Welcome sa tsikot. IMHO, I would consider other options or kung gusto mo talaga ng mazda then the 2 sedan is your best option if you cannot wait for the gen 2 ng mz3. Mahirap na magsisi sa huli pag bumili ka ng gen 1 ngayon and then lalabas na yung gen 2 after 1 or 2 years. May mga lalabas na din na bagong models like ford fiesta. Bottomline is nasa iyo pa rin ang decision.
-
Verified Tsikot Member
- Join Date
- Jun 2010
- Posts
- 27
June 30th, 2010 11:30 PM #1058Thank you sir gongrhey, actually, kino consider ko na ngaun ang mz2, honda city or toyota vios, I checked the ford website for ford fiesta, d pa pala siya na rerelease dito, siguro If I can wait pa, baka mag antay na ko, if not, baka pumili na lng ako sa tatlo. By the way, a friend of mine told me na mahirap daw ang assembly parts ng mazda, is this true ba? thanks again sir,
-
July 1st, 2010 03:16 AM #1059
wala pa akong experience sa pagbibili ng parts ng mazda kasi so far okay pa ang oto ko. pero base dun sa isang forum namin ng mga mazda owners hindi mahirap ang parts ng mazda. marami napagkukunan pag may mga reklamo silang parts na nasisira. sa banawe marami tindahan ng parts and accessories for mazda.
-
July 1st, 2010 01:14 PM #1060
Kung sa Banawe Q.C. Marami nyan sa Mazda Autorama, MazFord, etc. BTW, pag bago kasi yung tsikot mo usually worry free ito for major parts under 3 year warranty. Sa PMS ka nga lang gagastos every 10000 kilometer. Free yung 1K at 10K PMS sa mga Mazda dealers. Yung PMS ala Honda din yung rate.
Sa parts availability, walang tatalo sa Toyota kasi meron silang Parts Manufacturing Plant sa Laguna.Last edited by lamborghinione; July 1st, 2010 at 01:20 PM.