All New 2017 Mazda 3

[travajante]

Hobo method of replacing the car battery: connect another battery to the car's battery terminal connections before removing the car battery. I opted for this approach instead of replacing the EFB battery while the engine is running (not recommended due to the huge risk of damaging your car's electronic components).

This hobo method will keep the car's ecu powered, hence no risk of losing the istop configuration and infotainment system settings. Just be careful not to short circuit the battery connections (battery positive connection shouldn't touch the car's metal body, negative terminal).







A safer approach is to use a portable battery jump starter that comes with a powerbank. As long as there's power supply to the car's battery connection while removing the battery, those ecu settings will remain intact.

How to jumpstart a dead batt w/o using cables....
Thor, the mechanic - 9GAG
Thor!!![emoji95][emoji95][emoji95][emoji95][emoji95][emoji16]


Sent from my SM-G970F using Tapatalk

[jaytecson_]

Yuasa 95D23L/Q85
₱14,500 2 years warranty
iStop reset charge ₱2128 (Mazda Makati)

~

Panasonic Q90
₱10,800 15 months warranty
TPL Industries
Delivery hotline 0925 611 7755
134 West Avenue

~

Optima YellowTop D35
OPTIMA Batteries (Philippines) - Motor Vehicle Company - Quezon City, Philippines - 2,835 Photos | Facebook
Tel # 374 6302
₱17,500 2 years warranty

Among these 3 batteries. Can you rank it base on usage and reliability? I am prolly due for batt replacement and wanted to get a stock of this.


Sent from my iPhone using Tapatalk

[travajante]

Among these 3 batteries. Can you rank it base on usage and reliability? I am prolly due for batt replacement and wanted to get a stock of this.


Sent from my iPhone using Tapatalk

Optima & Delkor are from Johnson Controls. YellowTop is AGM, higher than EFBs, Delkor/Panasonic/Yuasa.

Optima YellowTop pros:
Deep-cycle and cranking power
Up to 3X longer life
15 times more vibration-resistant
Virtually spillproof
Mountable in virtually any position
Maintenance-free
Faster recharging
Optimal starting power
300+ discharge/recharge cycles

Yuasa EFB offered by MazdaPh should be Nippon made, iirc. Delkor EFB is Johnson Controls Korea. Panasonic EFB(black) here is Thai. Panasonic Blue from Japan is pricier than the black Thai. These EFBs are equally good. Just check the respective prices & warranties.....And, do yourself & your chosen batt a favor....grab a CTEK CT5 Start/Stop.[emoji4]




Sent from my SM-G970F using Tapatalk

[leozis]

Anybody here experience wrench light indicator cannot be reset? i already bring it to casa and they cannot reset it to.. tried holding the trip button then turn on and resetting on the headunit maintenance oil, tire and service schedule but still no luck..

[travajante]

Anybody here experience wrench light indicator cannot be reset? i already bring it to casa and they cannot reset it to.. tried holding the trip button then turn on and resetting on the headunit maintenance oil, tire and service schedule but still no luck..

Try this again...
1) Car off w/o pressing brake, press start button once
2) Press and hold start button and trip meter(without starting the car) for several seconds, an orange triangle will start flashing, when triangle stops flashing let go.

Sent from my SM-G970F using Tapatalk

[StockEngine]

Anybody here experience wrench light indicator cannot be reset? i already bring it to casa and they cannot reset it to.. tried holding the trip button then turn on and resetting on the headunit maintenance oil, tire and service schedule but still no luck..

If that casa cant fix your problem. Escate with mazda ph. They should find you a better person to deal with.

You can also report that damn service advisor..

[leozis]

Try this again...
1) Car off w/o pressing brake, press start button once
2) Press and hold start button and trip meter(without starting the car) for several seconds, an orange triangle will start flashing, when triangle stops flashing let go.

Sent from my SM-G970F using Tapatalk

i already done that and removing the negative terminal of the battery for 15 minutes but still seeing the wrench light

[StockEngine]

i already done that and removing the negative terminal of the battery for 15 minutes but still seeing the wrench light

Resetting can be done if there are no issues. If it's on permanently, the engine is seeing some real problem...

[leozis]

Resetting can be done if there are no issues. If it's on permanently, the engine is seeing some real problem...

Casa Scan my unit but no error codes found.. i also experiencing minor vibration on idle when aircon is off around 600-650 rpm. My car is only 9k mileage 2017 model 2.0

[travajante]

Resetting can be done if there are no issues. If it's on permanently, the engine is seeing some real problem...

Wrench is an oil change, tire rotation/pressure check interval reminder icon one can activate (in either distance or duration) or deactivate. A BCM function that's integral w/ the MzdConnect infotainment system, not w/ the ECU & isn't the Engine Malfunction Light.
Turned mine off since day1.

Casa Scan my unit but no error codes found.. i also experiencing minor vibration on idle when aircon is off around 600-650 rpm. My car is only 9k mileage 2017 model 2.0

Likely a BCM hiccup. They have to do more than just scan. Ask them for a MazdaConnect software update....or BCM reprogram if the lit icon really bothers you.
Your engine vibration is separate & more an Air/Fuel electro-mechanical issue some cleaning should cure. To rule engine mounts out, have them peeked at, too.

Sent from my SM-G970F using Tapatalk