All New 2017 Mazda 3

**jaytecson_** · February 16th, 2020 10:03 PM

Originally Posted by dongotskills

Had my car diagnosed in Mazda Makati due to Check Engine Light and DSC Malfunction Light.

Error code came from a faulty brake light switch.

Kaya pala there are times na nahihirapan ako magstart ng car ko kasi the car cannot detect that my foot is already stepping on the brake pedal. Pero once the car is running, there is no issue with the brake.

Still waiting for Mazda PH approval of the warranty claim and SA told me that once approved, it will take 3 to 5 days for the part to arrive.

Hoping it will be fixed ASAP. Thanks Tsikot!

This is exactly what they told me and almost 2 months now, parts havent arrived yet until I had it fixed myself.

Unsatisfactory experience in Mazda Main branch.

Sent from my iPhone using Tapatalk

**jaytecson_** · February 16th, 2020 10:04 PM

Good Sirs,

Looking to replace brake discs/rotors and pads.
Any recommendation for our M3 and where to buy/install it?

2017 mazda 3 2L

Sent from my iPhone using Tapatalk

**StockEngine** · February 16th, 2020 10:05 PM

Originally Posted by jaytecson_

Good Sirs,

Looking to replace brake discs/rotors and pads.
Any recommendation for our M3 and where to buy/install it?

2017 mazda 3 2L

Sent from my iPhone using Tapatalk

Rotors agad? Baka stuck calipers?

**jaytecson_** · February 16th, 2020 10:07 PM

Originally Posted by jojopad

My experience with Makati branch was the complete opposite, e.g. pms takes more than 4 hours to complete despite that I'm the first one to arrive (scheduled at 8am always), there's only one mechanic on the job compared to north edsa with at least 3 mechanics working on the clock to get the job done within 2 hours. A simple oil change shouldn't take more than an hour but that's how long it took for the makati branch to get it done (all recorded in a dashcam vid). They did a battery test but saw some fluid spills inside the engine bay, and this was the result:

At north edsa and quez ave I'm free to take a look on what's being done with the pms unlike at makati where I was told I'm not allowed at the service bay. It's better to see for yourself on what's really being done with the pms instead of a printed report. Yeah the lobby is comfy but I prefer to be at the service bay to see what's being done with my car.

Sorry for my rant but that's my experience with the Makati branch. Perhaps I will probably get a better service if I'm a member of one of their favorite mazda clubs but that's not really what quality service is all about. I get better service at mazda north edsa despite the very small service bay. I would expect more from the main branch.

When my M3 got a service in Mazda Makati, they unplugged the dashcam so wasnt able to see what they did and there were unfinished install on my dash.

I am wondering if I can get my last PMS in Mazda North Edsa instead, do they have appointment system or walk ins would be fine?

Sent from my iPhone using Tapatalk

**jaytecson_** · February 16th, 2020 10:09 PM

Originally Posted by StockEngine

Rotors agad? Baka stuck calipers?

Maarte lang sir [emoji28] racing racing gusto

Sent from my iPhone using Tapatalk

**jojopad** · February 16th, 2020 10:21 PM

Originally Posted by jaytecson_

I am wondering if I can get my last PMS in Mazda North Edsa instead, do they have appointment system or walk ins would be fine?

Call them up and set an appointment 15 days before the pms due date. They have a very tight service bay area and a fixed schedule for the pms so best to call them first before dropping by for a walk-in.

**dr_pido** · February 17th, 2020 04:09 PM

Was lucky enough to have a colleague see that my tires had this huge crack running along the whole sidewall or else might hve had a blowout.... Had to replace the whole set just for security. Is 225/45 ok even for stock rims? TY

Sent from my SM-G975F using Tapatalk

**travajante** · February 17th, 2020 04:15 PM

Originally Posted by dr_pido

Was lucky enough to have a colleague see that my tires had this huge crack running along the whole sidewall or else might hve had a blowout.... Had to replace the whole set just for security. Is 225/45 ok even for stock rims? TY

Sent from my SM-G975F using Tapatalk

225/45 will give you slightly better grip & more cushion, doc.[emoji106]

Sent from my SM-G970F using Tapatalk

**dr_pido** · February 17th, 2020 05:22 PM

Glad to have replaced the whole lot. Another tire was found to have cracks on the inner wall sheesh.. This would be my first time to experience this? Is it the brand of tires or am i just over or under inflating my tires?

Sent from my SM-G975F using Tapatalk

**StockEngine** · February 17th, 2020 05:30 PM

Originally Posted by dr_pido

Glad to have replaced the whole lot. Another tire was found to have cracks on the inner wall sheesh.. This would be my first time to experience this? Is it the brand of tires or am i just over or under inflating my tires?

Sent from my SM-G975F using Tapatalk

Underinflating..