Isuzu Dmax Owners [ARCHIVED]

[jarhead]

ganon ba.... kc meron kinabit malapit sa foglamp, eh mahina pakinggan.. 1 set lng nilgay ng owner, i told him dapat 2 sets, ayaw naman.. parang kuripot kc yun.. hehehehe....

[2Dmax]

I think VIC aftermarket parts are good ones. Ingat lang sa mga peke nyan. To look for the ginuine VIC for oil filters, look for the JAPANESE CODE and PROD CODE (combination of numbers and letters) on the top side of the filter. Using a fake one can seriously damage your engine because of its ineffeciency..

[2Dmax]

HORN kong ginamit is STEBEL NAUTILUS. Parang sa mga bus ang tunog nya. Except buong-buo ang tunog. Kinabit ko sa bandang braces ng bumber ko. Ok naman ang location kasi hindi siya nababasa ng tubig and putik. I don't need to splice the original wirings altough i also changed the recommended relay (30 A). Also, I used the recommended wire thickness (AWG) so that voltage loss would be very minimal. All I did was re-route the wirings (without splicing any wire) from the relay/fuse box compartment into the outside. So that anytime puede kong ibalik sa stock ung busina ko without hassle within less than 1 minutes.. :transform

[Djerms]

Hey guys, you want to set an EB for DMAX owners? Tamang tama baka pwede na rin itapat eng EB ng Isuzu Group! (IMG)

[docglen]

isuzu has launched the new dmax LS. same features as the old LS. nice new colors blood red and grey.

[x_jason_x]

pare tinangal mo ba yun bumper mo yun nilagay mo yun nautilus? Nilagay ko yun stebel magnum sa place ng stock horns. No modifications needed.

[ian_rex]

pare tinangal mo ba yun bumper mo yun nilagay mo yun nautilus? Nilagay ko yun stebel magnum sa place ng stock horns. No modifications needed.

how about yung relay sir? saka nag splice ka ba nang wire? saka isa pa, paano ba tinatanggal yung front bumper? saan-saan ba mga turnilyo nun? pati ba yung grilles, tinatanggal din pag aaalisin ang bumper?

[cardo]

pede kaya i-biturbo ang dmax? just a thought

[dlim]

hello, regarding sa horn, magandi rin kung isasabay mo ang hella supertone and the stebel nautilus.. yung nautilus ko nasa likod ng front bumber and the supertone nasa harap lang, behind the front grill...

[2Dmax]

Ung sa akin nilagay ko sa bandang likod ng foglight. No need to remove the bumber and the grill. All I did was removed first the mud guard near the fender (above the front tire) and you could see the metal braces of the bumper. I just drilled a hole on that braceand install my NAUTILUS HORN. I didn't need to splice any wire. I just re-routed the relay wirings from the inside of the relay panel to the outside. (ayaw ko kasing galawin ang stock wiring ko)