Honda BR-V

[ieddam]

Would it have been better if the 3rd row seat had 50:50 split? Better versatility in pax/cargo space

Sent from my SM-G935F using Tsikot Forums mobile app

You can split the 3rd row 50/50 kaya lang magkakaron ng hump yung loading area.

[benru3tps]

You can split the 3rd row 50/50 kaya lang magkakaron ng hump yung loading area.

Yup, i think i should have written- it should have a 50:50 split&tumble 🤣

Sent from my SM-G935F using Tsikot Forums mobile app

[glntVR]

Would it have been better if the 3rd row seat had 50:50 split? Better versatility in pax/cargo space

Sent from my SM-G935F using Tsikot Forums mobile app

Yes, but probably this was one thing Honda did to reduce the cost of the vehicle

[bosstan]

"1ST TIME CAR OWNER" PLEASE DO HELP ME TO DECIDE WITH THESE MODELS : Hyundai Accent 1.6 sedan AT DSL vs Mobilio AT vs BRV AT 2017

*Fuel consumption
*Maintenance

Thanks in advance! God Bless Everyone!

[dranyal]

Yes, but probably this was one thing Honda did to reduce the cost of the vehicle

On the S variant, yes. But on the V variant they could've made the option available.

After 2 months of using a V variant, and initial experience with a brand new car I've discovered many fitment issues with body panels, corroded/rusted structural panels, issues with seat mechanisms.
And the enormous heat the engine develops even on short drives. I've made it a habit of popping the hood every night after I get back into the garage to let some heat dissipate.

[ieddam]

On the S variant, yes. But on the V variant they could've made the option available.

After 2 months of using a V variant, and initial experience with a brand new car I've discovered many fitment issues with body panels, corroded/rusted structural panels, issues with seat mechanisms.
And the enormous heat the engine develops even on short drives. I've made it a habit of popping the hood every night after I get back into the garage to let some heat dissipate.

Saan mo nakita yung rust and corrosion? Baka serious issue yan. Yung sakin wala naman rust pero ang nakita ko ring problema may plastic trim sa my windshield na medyo loose. Yung fuel tank door medyo hindi rin pantay pero overall okay naman. Hindi ko rin naexperience yung sobrang init na makina.

[dranyal]

Saan mo nakita yung rust and corrosion? Baka serious issue yan. Yung sakin wala naman rust pero ang nakita ko ring problema may plastic trim sa my windshield na medyo loose. Yung fuel tank door medyo hindi rin pantay pero overall okay naman. Hindi ko rin naexperience yung sobrang init na makina.

Nasa corner brace sa likod ng dash. Kalawang siya na powder. Nilagyan na nung 1000KM/30day PMS ng rust remover pero hindi dun galing yung kalawang.
Sabi wala daw nakita na kalawang. Nung nag route ako ng USB cable para sa rear view recorder nakita ko yung source.

Yung main support bar/tube ng front bulk head.
Putok yung kalawang sa pintura nung bakal.
Kaya nagpulbo dun sa corner support dahil dun bagsak pag natagtag sasakyan.
Wala wenta yung tumingin sa 1000KMs check. Nagtagal pa ng husto yun, ha.
Mula 11am hanggang past 4pm nakuha dahil pina check ko yung rust.
Nalimutan pa i-clip yung isang lock ng air filter cover - haaaay.

[lalamariano]

Update on my FC after working again in Makati for 2wks already:
Daily average from 9.5 to 7.8km/l and from date of purchased 9.9 to 9.7km/l.

Sent from my SM-A710Y using Tsikot Forums mobile app

[StockEngine]

Update on my FC after working again in Makati for 2wks already:
Daily average from 9.5 to 7.8km/l and from date of purchased 9.9 to 9.7km/l.

Sent from my SM-A710Y using Tsikot Forums mobile app

using "acar" app?

Sent from my SM-G935F using Tsikot Forums mobile app

[lalamariano]

No, Sir. I just checked my last FC post

Sent from my SM-A710Y using Tsikot Forums mobile app