2010 Chevrolet Cruze!

[dkas]

I'm going to the dealer tomorrow to see my Cruze!

kakaexcite! but i can't take it home pa without the plates...

Cruzers - how long did you wait to get your plates?

Sir almost a month

[Epats]

hindi pumapasok ng smooth sir eh. parang ang gaspang pag nag shift. parang may humaharang. Pina check ko na siya sabi antayin ko na lang daw pag hindi na talga ma shift for replacement.

Ano ba naman yan. bakit hihintayin pa masiraan ka sa daan. If they already know that it's obviously not normal, they should have already ordered the part while the vehicle is still in running condition. Unless they always have a loaner car available. But still there's a risk that the transmission might all of a sudden refuse to shift. I'm not gonna take that if I was in your shoe.

I'm going to the dealer tomorrow to see my Cruze!

kakaexcite! but i can't take it home pa without the plates...

Cruzers - how long did you wait to get your plates?

I'm excited for you as well! Congratulations. You'll soon enjoy the decency of this car. Just an unsolicited advise... take note of the vehicle's conduction sticker number. and borrow the key and turn the ignition on to see the kilometer reading. Take note of it to make sure nobody uses the car before you. Why not take it out for a test drive na rin pala?

[eeeyaaan]

What was committed was committed eeeyaaan. TCCCI does not get bad ratings because of Chevy Pasig. They are working with us to build the brand. If there are dealers that do not commit to the standard PMS, they should be dealt with accordingly by the Distributor who protects the Brand. I myself will be their no. 1 supporter and willing ally on this.

If you have issues with Chevy Pasig, any commitment by my team that they did not commit to, let me know! I'm dead serious in every commitment I made in this thread.

sorry about the wrong dealer. I was reading the discussion board on facebook while going through this and I thought I was still reading about chevy pasig. anyway, i do think 8k for PMS is simply too much, maybe it's possible to call your SA at q. ave again to recheck the price?

anyway, sorry again sir awallit. But it's good to know we have someone who could listen to our problems and has the power to do something about it I agree with making the PMS fee uniform so that we all wouldn't have to worry about if we're being cheated or not.

i have a question, is there any way to stop the automatic open-air "safety" feature that let's the air outside enter the car from time to time? fume's from other cars are starting to get annoying

[Epats]

I'm going to the dealer tomorrow to see my Cruze!

kakaexcite! but i can't take it home pa without the plates...

Cruzers - how long did you wait to get your plates?

and by the way, it took more than a month for my plate number. They had an issue about something coming from customs that LTO requires for registration. I forgot the term they use for it.

[j.caine]

Ano ba naman yan. bakit hihintayin pa masiraan ka sa daan. If they already know that it's obviously not normal, they should have already ordered the part while the vehicle is still in running condition. Unless they always have a loaner car available. But still there's a risk that the transmission might all of a sudden refuse to shift. I'm not gonna take that if I was in your shoe.



I'm excited for you as well! Congratulations. You'll soon enjoy the decency of this car. Just an unsolicited advise... take note of the vehicle's conduction sticker number. and borrow the key and turn the ignition on to see the kilometer reading. Take note of it to make sure nobody uses the car before you. Why not take it out for a test drive na rin pala?

[SIZE=3]Thank you![/SIZE]
[SIZE=3][/SIZE]
[SIZE=3]Sorry to ask this but what do u mean conduction sticker? Cruze will be my first car kase…[/SIZE]
[SIZE=3][/SIZE]
[SIZE=3]I texted my SA – she told me they have to order pa pala the car that I wanted. I want the Misty lake LS AT kase. They have the manual misty lake and it’s on display. I can see it tomorrow. I can wait for it but I guess I have to wait longer than expected. I’m travelling kase this December and hopefully by December 27, I can take it home na…[/SIZE]

hopefully there wont be any issues with LTO since Cruze has been in the country for months and i believe there are quite a few numbers of registered Cruze na

[resident_evil]

Kumusta na nga pala yung Cruze ni Sir Resident Evil? Sir, how're you doing? Ayaw mo na ba i-follow up yung cruze mo? Mas maganda ba sir yung LT na loaner car? ha ha ha

Si sir electone na una nagpa-PMS. Sir how's the weather down south? Ok pa rin ba ride ng cruze mo, wala pa mga rattles, ticks, or buzzes?

Hi bro. I'm still using the loaner car. No updates yet on my Cruze, which means nothing is happening. Bahala sila. At least hindi tumatakbo mileage ng kotse ko. Yung kanila muna gamit ko. Hay nako. Parang gusto ko na magsisi sa car na to. Kung di lang sya maganda e.

Anyway, the loaner car has 18k mileage on it. It consumes 7 to 8km per liter city driving so expect the same with your vehicles. It still makes noise on reverse.

[marlboro2000]

Question:

I noticed this knob beside the Power Steering Fluid and it was not fully locked. May I know para saan ito?

Maraming salamat

[awallit]

Already sent sir.

I hope we can have it soon.

Sir Awallit,

Since you are part of the whole chevy team, may I suggest that you will bring the following matters into your meetings with the big bosses.

1. Uniform pricing for all service centers of chevy. This way, we can have it serviced to the service center nearest us para naman makatipid kami sa gas and we don't have to worry about different prices of labors and parts.

2. Make the rest of your dealers to COMMIT 100% to what have been committed and make no mistakes in making unnecessary excuses.

And for us, cruze owners, let it be a lesson to check before hand (ask quotations from different dealers/service stations and for the benefit of us all here, POST IT para alam ng lahat kung may pagkakaiba at para malaman din natin kung saan tayo magpapaservice na hindi tayo tinataga.

Let us all join forces para ma-improve ang service ng chevy. Mag-ingay tayo kung kinakailangan para mabigyan pansin kaagad ang ating mga problema.

[shermanWTC]

Question:

I noticed this knob beside the Power Steering Fluid and it was not fully locked. May I know para saan ito?

Maraming salamat

Eto yung valve for Aircon refrigerant. Baka maluwag lang.

[marlboro2000]

Eto yung valve for Aircon refrigerant. Baka maluwag lang.

ahhhh baka ito ang reason bakit hindi masyadong malamig ang aircon dahil hindi nakasarang mabuti? Sinara ko ng maigi, I will experiment kung lalamig na.

By the way, nag DIY na ako sa tube ng aircon, binalot ko na ng foam at tinalian ng electrical tape, sana lalamig na talaga.