Results 61 to 70 of 1387
-
Tsikot Member Rank 2
- Join Date
- Jun 2005
- Posts
- 3,774
April 13th, 2017 02:40 PM #61Eto pala yung breakdown ng parts from xenon concepts.
NHK projector Q5
NHK harness
Hi-Arc ballast
Hi-Arc bulb
I saw the ballast and bulbs in lazada from a local seller. Di naman kamahalan.
I guess if xenon concepts buy in bulk, sobra mas mura nila makukuha. Kaya mas may profit margin sila.
Ano kaya mga gamit nila hid retrofit?
Sent from my ASUS_Z00AD using Tapatalk
-
April 19th, 2017 05:03 PM #62
Anybody tried/heard of RetroTech Projector Retrofits by Redline Auto Works?
RetroTech Projector Retrofits by Redline Auto Works - Home | Facebook
-
April 19th, 2017 05:36 PM #63
-
April 19th, 2017 05:46 PM #64
-
April 19th, 2017 06:14 PM #65
Although I recommended Xenon Concepts for a friend due to budgets constraints, parang pakiramdam ko iba parin gawa nila GaryQ/Retrotech.
Yung kay Xenon kasi naka 2 backjobs na kami due to moisture inside the headlights. And pakiramdam ko "mas cleaner" yung bato ng ilaw nila GaryQ/Retrotech.
Just my 2 cents
-
April 20th, 2017 10:52 AM #66
Gary Qs work quality is over rated ... his people are not that competent ...
-
April 20th, 2017 11:30 AM #67
-
Carpe Diem
- Join Date
- Aug 2009
- Posts
- 2,071
April 20th, 2017 11:43 AM #68
-
Tsikot Member Rank 2
- Join Date
- Jun 2005
- Posts
- 3,774
April 20th, 2017 01:42 PM #69Hmmm.... ano kaya ang first hand experience ni walter kay garyq.
I know of a few people who had their retrofit at gary's place. Wala maman reklamo.
I had mine done sa xenon concepts. Leap of faith but i think, so far worth the jump
Sent from my ASUS_Z00AD using Tapatalk
-
April 20th, 2017 09:45 PM #70
Had a Stage 2 kit from HIDRetrofits installed on a Tucson way back in 2013. No issues to date. I have to agree that they were expensive (paid something like 22-24k) but I concede that the work done was top notch. They were a class of their own back then.
But it's already 2017. After four years, you'd think they've figured out how to streamline the process so it will cost less. Or maybe optimize their supply chain so they still get the same quality parts at a lower cost. But apparently, they decided to keep their prices pretty much the same throughout the past years.