Detailing Thread [For Newbies][continued 2]

[indiej]

4 hours, that's great.

*Hardinero, now you may take kindly to the KAIO->915 route.

[flakez]

when using swirlx, pwede ba skip ko na yung paint cleaner? step 2 na kagad? i assume kasi matatanggal na rin ng swirlx yung mga paint contaminants.

thanks

[madkatz]

when using swirlx, pwede ba skip ko na yung paint cleaner? step 2 na kagad? i assume kasi matatanggal na rin ng swirlx yung mga paint contaminants.

thanks

yes you could skip step 1

[flakez]

yes you could skip step 1

great! thanks!

magkano nga pala SRP nito? may nakita ako dito sa may mckinley hill nasa 650 lang ata. nakita ko kasi kay autobisyo 860. hehehe

[madkatz]

great! thanks!

magkano nga pala SRP nito? may nakita ako dito sa may mckinley hill nasa 650 lang ata. nakita ko kasi kay autobisyo 860. hehehe

which one Step 1? or SwirlX?

if its step 1 it should be around 550 for the mothers SRP

its at 600 ot 650 from autobisyo

if its swirlX it ranges from about 700 to 750 in gray market and 895 for SRP

[flakez]

which one Step 1? or SwirlX?

if its step 1 it should be around 550 for the mothers SRP

its at 600 ot 650 from autobisyo

if its swirlX it ranges from about 700 to 750 in gray market and 895 for SRP

swirlx. so mukhang mura yung tinda nila don. hehehe. makahingi nga ng price list. hehehe

[Hardinero]

which one Step 1? or SwirlX?

if its step 1 it should be around 550 for the mothers SRP

its at 600 ot 650 from autobisyo

if its swirlX it ranges from about 700 to 750 in gray market and 895 for SRP

ms madkatz, which of the two are better mothers step 1 or swirlx?
also, which of them can be use bi-monthly..i heard that swirlx is abrasive...

kakalito sa dami ng product ah...

tama ba yung nasa isip ko na if you want protection go for sealant

and if for shine go for polish,step 2 and LSP....

or pwede rin naman ma-achieve the best of both worlds by

swirlx (or polishing product ) + AIO + 2 coats of sealant + LSP (as for me 915)

4 hours, that's great.

*Hardinero, now you may take kindly to the KAIO->915 route.

paps, paki-elaborate ...hindi ko po na-gets..medyo mahina me kunti sa malalim na english..hehe

[jmpet626]

Mas agressive ang Swirl X kesa mothers Step 1. Medium cut ang swirl X and also Non-Diminishing abrasives ang gamit ng swirl X.

[jmpet626]

i would recommend you use water first, if its not yet removed then use APC especially if the product isn't oily, if the product on the pad is really oily then you can use the degreaser but be sure to rinse it thoroughly after, any degreaser left on the pad once not rinsed thoroughly would degrade the foam

Thanks. Will use APC na lang before washing the pad. Ano mas maganda dilution 4:1 or 10:1?

[madkatz]

swirlx. so mukhang mura yung tinda nila don. hehehe. makahingi nga ng price list. hehehe

Actually most people who sell swirlX really sell them lower, i think my BF and Autobisyo sell them between 700 and 750 question remaining is who's more convenient