Detailing Thread [For Newbies][continued 2]

[mada]

already got the 476 from autobisyo and OCW from madkatz's bf.. thanks!
the products are complete:

Step 1
Nano Glos
476
OCW
Sliq

any additional reminders on applying the products?? thank you guys.. big fan of this thread!

sir...yung step 1 = mother's carnuaba phase 1 pre-cleaner wax ba yan? yun kasi nabili ko na naka indicate sa bottle (phase 1 hindi step 1)...

naniniguro lang kong tama ba...

[dandyagustin]

sir...yung step 1 = mother's carnuaba phase 1 pre-cleaner wax ba yan? yun kasi nabili ko na naka indicate sa bottle (phase 1 hindi step 1)...

naniniguro lang kong tama ba...

as the front label says:
Mothers California Gold Pre-Wax Cleaner, STEP ONE po ang nakalagay

[georgeD]

sir...yung step 1 = mother's carnuaba phase 1 pre-cleaner wax ba yan? yun kasi nabili ko na naka indicate sa bottle (phase 1 hindi step 1)...

naniniguro lang kong tama ba...

see this: http://www.detailguide.com/03_how_01..._seal_wax.html

[Chikselog]

ok.. salamat din!!
again, for the curing time.. about the 476 and OCW, do they have curing time also like when using the Nano Glos?

476 meron, not sure sa OCW. Siguro 4 hours sa OCW.

[dandyagustin]

476 meron, not sure sa OCW. Siguro 4 hours sa OCW.

ok.. so for for the waxes.. 4hours curing time para sure.. thanks!!

[indiej]

ok.. so for for the waxes.. 4hours curing time para sure.. thanks!!

para sure, next day or even later. and the next layer, be more gentle during application. buffing-off, goes without saying. Use light handed/pressure as with sealants.

or google spit shining
http://www.autogeekonline.net/forum/...t-shining.html

if it's about full coverage, getting your foam applicator everywhere, smearing the whole panel during application and during buffing of the first layer ensures that. Just be aware if it kinda squeaks during application, that means you gotta reload wax.

[dandyagustin]

*indiej

thanks! so minimum lang pala ang 4 hours for the curing time right? the longer the better?

as for the application, I'll try to be gentle in applying as well as buffing it off..

[Hardinero]

OCW - 1.2K but if you'll get the combo (ONR+OCW), 2K only
476 - 700

paps, san ka naka-score ng OCW and ONR for 2K? sa autobisyo ba?

[Hardinero]

para sure, next day or even later. and the next layer, be more gentle during application. buffing-off, goes without saying. Use light handed/pressure as with sealants.

or google spit shining
http://www.autogeekonline.net/forum/...t-shining.html

if it's about full coverage, getting your foam applicator everywhere, smearing the whole panel during application and during buffing of the first layer ensures that. Just be aware if it kinda squeaks during application, that means you gotta reload wax.

paps, parang ok itong spit shining ah...kaya lang nalilito ako sa explanation nila..

baka you could explain it in laymans term..

[dbhollanda]

paps, san ka naka-score ng OCW and ONR for 2K? sa autobisyo ba?

i also got this and bought from a seller in sulit and turned out that the guy is also a member of tsikot and fd club...