Results 1 to 10 of 31
-
June 8th, 2010 12:28 AM #1
Can someone please suggest a good vulcanizing shop in the vicinity of Pasig [or anywhere else where the work satisfies you]?
We all want a good shop with a legitimate pricelist and charges you fairly. We won't mind paying a little extra if they have good equipment and provide good quality work...
Please people, let's compile good shops for the benefit of everyone
Best Regards!Last edited by kotiko; June 8th, 2010 at 12:33 AM.
-
Tsikoteer
- Join Date
- Nov 2009
- Posts
- 456
June 8th, 2010 11:08 AM #2If there is a Goodyear Servitek branch near your area, I think they provide good vulcanizing services.
-
-
Tsikoteer
- Join Date
- Nov 2009
- Posts
- 456
June 8th, 2010 01:57 PM #4It depends on the kind of damage the tire has. A bigger hole will require a bigger "cold patch". I haven't been to Servitek in a while (no flats lately) but I estimate the service to fix a flat tire to be P200-P400. You may consult the yellow pages and give them a call for a quotation.
-
June 8th, 2010 02:29 PM #5
Goodyear sa Autocamp... P30 kapag na-check tapos walang butas.. P200 kapag meron... ( hiningi ko nga yung bumutas sa gulong ko amp, mga 1inch na alambre un..badtrip!!)
-
June 8th, 2010 06:13 PM #6
sorry P50 pa la kapag walang butas... kakapunta ko lang kanina sa goodyear autocamp..
nagpacheck ng gulong..
-
Verified Tsikot Member
- Join Date
- Sep 2016
- Posts
- 2,348
June 20th, 2019 05:12 PM #7Sorry. Just need to revive a very old thread instead of making a same thread.
May maisa-suggest ba kayong reputable vulcanizing shop around Pasig? Mukha kasing may slow leak yung rear right tire namin eh. While the other tires lose around 2-3 psi in a week or 2, nasa 4-5 psi ang dinadrop nung rear right. First time kasi maencounter kaya I want to have a peace of mind pag naglong drive na kami.
Thank you and sorry.
-
Verified Tsikot Member
- Join Date
- May 2018
- Posts
- 611
June 20th, 2019 05:28 PM #8More or less, all vulcanizing shops are the same naman. Baka sa pito or tire stem yung leak mo so consider replacing that din. Di naman gaano mahal yun (can't remember how much, but it's not expensive).
===
Make sure walang bata rin fooling around in your garage - dati, it turned out my daughter and yung mga pinsan niyang magagaling, naaliw sa hissing sound pag pinindot yung air release. Kamot ulo kami lahat magkakapatid bakit nababawasan ng hangin yung mga cars sa garahe, until nadiscover ng brother ko in the act yung pinag-gagawa ng mga bata.
-
Verified Tsikot Member
- Join Date
- Sep 2016
- Posts
- 2,348
June 20th, 2019 05:31 PM #9
-
Verified Tsikot Member
- Join Date
- Jan 2018
- Posts
- 844
June 20th, 2019 05:54 PM #10Just make sure if they need to plug a leak na cold patch ang gamit nila at hindi tusok.
Sent from my iPhone using Tapatalk
As expected, in response to Tesla’s entry into the Philippines market, Ford will be bringing in the...
Tesla Philippines