Detailing Thread [For Newbies][ARCHIVED]

**delfronda** · March 9th, 2006 08:03 AM

Originally Posted by delfronda

sir, tama po ba intindi ko, bale 1part WAUD to 2 parts distilled water? o yung 1/3 nung laman nung WAUD ilagay sa 250ml or so? kc i have the old bottle of eo wipe and shine. pwede ba ilagay ko dun 1/3 nung waud then fill it up with distilled? therefore making it 1 part waud to 2 parts water? Ano po ba tamang ratio ng water para maging qd yung waud? thanks in advance!

up ko lng yng question ko tnx

**theveed** · March 9th, 2006 11:09 AM

1:1

**chain** · March 9th, 2006 04:33 PM

sometimes kahit QD mismo, I cut it with water during spot claying sessions..

**july23** · March 13th, 2006 12:32 PM

sa mga experts, ask ko lang kung kaya ng buffing yung scratch about 5mm? during carwash ko kahapon, tinamaan ng nozzle ng water spray yung door passenger side. medyo malalim kasi feel ng fingernail, pero di pa naman kita metal. if di na pwede buff ano pwede remedyo?thanks.

**chain** · March 13th, 2006 12:41 PM

Originally Posted by july23

if di na pwede buff ano pwede remedyo?thanks.

may pic ka ba?

anyway, repaint na yan kung hindi na kaya ng polishing.

to a certain extent, you can only improve the appearance of the defect. maybe, lessen the scratch (and its visibility) but sometimes you have to cut your losses and either live with it or have it spot painted na lang.

**july23** · March 13th, 2006 12:50 PM

Originally Posted by dehadista

may pic ka ba?

anyway, repaint na yan kung hindi na kaya ng polishing.

to a certain extent, you can only improve the appearance of the defect. maybe, lessen the scratch (and its visibility) but sometimes you have to cut your losses and either live with it or have it spot painted na lang.

ok. thanks.

**karl88** · March 16th, 2006 03:39 PM

mga detailing experts, help naman sa problem namin. my brothers 2 week old car had a yellowish stain on the hood. a few days ago, nakita ko na merong parang very very small brown thing sa hood niya (parang galing sa puno). after its first carwash this morning, natanggal yung parang kahoy na maliit pero nagkaroon ng yellowish stain. the carwash/detailing shop tried to use clay to remove it, pero di man lang natanggal or nabawasan yung stain.

i attached a pic para may idea kayo what i am describing.

thanks.

**ILuvDetailing** · March 16th, 2006 03:44 PM

a little polishing and claying should do the trick...

**chain** · March 16th, 2006 06:06 PM

ano ba yan? tree sap?

kung hindi nakuha ng claying, try to go a bit higher in the abrasiveness scale.. but don't take out the big guns (Rubbing Compound, wet sanding) yet.

baka makuha pa sa tiyaga..

**karl88** · March 21st, 2006 09:34 AM

Originally Posted by dehadista

ano ba yan? tree sap?

kung hindi nakuha ng claying, try to go a bit higher in the abrasiveness scale.. but don't take out the big guns (Rubbing Compound, wet sanding) yet.

baka makuha pa sa tiyaga..

actually i really dont know what it is. siguro nga tree sap. aside from my brothers ride, i found one on my city's hood as well. para siyang kulay kalawang...pero di naman talaga rust kasi parang nasa ibabaw lang siya. when the carwash guy tried using clay, kahit mga more than 10 times na niyang ni-rub yung clay di pa rin nabawasan.