Detailing Thread [For Newbies][ARCHIVED]

[chain]

you did right.. I use FX Synwax for light colors too.. Synwax is a bit similar to NXT. you'll notice that the top lid of the container is a bit difficult to pour wax with. may booster wax pa yan di ba?

durability wise, siguro a week and a half wala na yung slickness.

Reflections naman for dark. tapos may Reflections TOP Coat pa.. this product I kinda like to play around with.. parang mix and match.

[stubby]

whew...thanks dehadista. wala ako nakitang booster wax nito eh. i was given a mothers pamphlet and all thats there on the fx series is the detailer wax. i hope the qd after washes will help maintain the slickness.

i did notice the difficult lid for pouring. since you use it, how much of the wax do you pour on the applicator (e.g. as small as a 25 centavo coin?) and for how big a surface is this amount good enough for. thanks po!

[chain]

try to go as thin as possible.. that's why I'd go for Foam Applicator Pads on this one.

you'll just have problems removing a thick layer when a thin one will suffice.

BTW, when it comes to product removal, magaling ang FX dyan. although swirl filling capabilities talo sya sa NXT. Notice that these 2 are quite similar...

Also, Nilipat ko na lang ng container para madali.. something to what Simex offers (yung small catsup bottles..)

[chain]

Oh forgot to mention... eventually your applicator pad would become saturated with the product so just go minimal on the wax.. yung parang tinitipid.

check out PAD.. andun yung sinasabi ko.

[ILuvDetailing]

kakabili ko lang ng EO Nano Wax and QD from BB this morning, subukan ko bukas :D

[chain]

uy ganda yang Nanowax!

[patopig]

Wow. Daming posts na bago. Hehehe

Stubby: Welcome to the world of detailing! I do have a few tips which I found while learning this hobby (and I'm still learning).

a) I found the instructions in this thread great for drying your car (Posted by Theveed):
http://tsikot.yehey.com/forums/showthread.php?t=2366

b) Mejo madali kumapit water spots sa mga windshields ng MZ3 natin. If possible, always clean windshields. Personally I use the following steps to clean the MZ3 windows (done after washing the car):

1) Spray with diluted APC (or in my case 1/10 Armor All Multipurpose Cleaner + 2/10 Vinegar + 7/10 water) amd wipe off with cloth (cotton or MF, your choice)
2) Wipe with damp MF or pranela
3) Wipe with newspaper to remove streaks

c) For the interiors, I use Armor All Protectant around once a month and a plush MF for removing dust/lint from the dash. If the ceiling gets dirty, again diluted APC (without the vinegar) will help.

d) As for the KP600 or other ROPs, keep in mind that when you buy one, you'll need to purchase velcro strips (just for the kp600, to be able to attach most polisher/buffing pads), the pads themselves (which can be a little expensive/difficult to find) and an extension cord.

e) for the types/brands of waxes to use, I normally read around this thread and the following sites:

PAD
Autopia (Check out the reviews)

f) I normally clay around once a month. Moms den gamit ko. Para mapadali trabaho mo, bili ka na lang ng Eagle One's Wet Wipe and shine (Quick Detailer). Its only around 224 pesoses sa mga Blade car accessory stores and slightly more expensive sa Ace or True Value ata. This way, you would not need to rinse after claying. (You would just need to wipe with your MF). You can even dilute it with water para di agad maubos. (Tip from Dehadista) You can also use this to remove new waterspots/bird poo which sometimes are not removed after washing.

When you cannot wash your car, you can just dust it with a CCD (california car duster) and spray with QD to renew your car's shine!


Personally, I use carnauba wax for my MZ3 and I normally wax every week. I wash around twice or thrice a week. These past few days, my car has been really dirty because it has been raining every day. Ayaw ko naman maghugas ng maghugas kasi baka dumami swirl marks ng car ko. Wah!

[patopig]

Gusto ko na rin sumubok ng mga high end synthetics pero inuubos ko muna yung phase 3 ko. ehehe. I am interested to see the look of the reflections combo. Mejo mahal nga lang kasi around 1.8k yung pareho.

[chain]

actually, yang Nanowax swak dyan sa color ng MZ3 mo hehehe.. even Mom's Reflections.

[ILuvDetailing]

How do you classify Nanowax? Carnuba? or Synthetic? It has a microfiber and a foam applicator included. Looks good, can't wait to try it out tomorrow, sana wag umulan