2014 mitsubishi montero

[vickoy1228]

My MS steering hissing sound appeared after my 1k PMS, usually it will appear after 15mins or more of continues driving tas on & off sya...

[DeathRow]

Guys, I just met Zix and had my optitron, AC filter and EGR blanking done, and I was impressed with the way he worked, he absolutely knows what he is doing, and he knows the car inside out. To be honest, I don't think any certified Mitsubishi mechanics would be as good as him, not even close.

Zix, I would like express my greatest appreciation to you for what you have done for my car, you save big bucks for people, you need to be recognized. All the best to you!

Hi Sir Zix, can you also PM me all these things, will get them done from you one weekend. Thank you!

[orttech]

Bought my monty gls v last feb... Since then, I've been using shell's V-power... Acceleration is good...No loud noise observed.. Zero black smoke.... Well the last part might be due to sir zixx blanking my egr...😄


Posted via Tsikot Mobile App

The last time when I met Zix for his mods, he advised me that I should only use Unioil's Euro4 diesel. The big 3 offers only Euro2 level no matter what kind of additives they add in their diesels, still dirty fuel.

It's just that Unioil's Euro4 diesel makes the engine really loud, it bothers me. I'm not sure if I should try the V-Power or Turbo diesel to see if they would make the noise quieter.

[playplugg]

My MS steering hissing sound appeared after my 1k PMS, usually it will appear after 15mins or more of continues driving tas on & off sya...

Sir vickoy1228,

Try nyo po, after start-up (bago i-drive after a long time rest ng sasakyan) idle nyo po at least 15 mins, o umangat yung gauge sa temp lagpas sa C, kahit sa unang guhit lagpas sa C, saka nyo i-drive normally... (kung patience enough, 30mins for normal range ng temp for idle, walang revolution, hindi naka-andar ang a/c). Na-observe ko lang po sa monty, once na nasa normal temp na yung engine yung mga fluids ng brakes, steering, clutch, in a very short period, normalized na... (kadjot ng clutch, hard steering saka yung brakes, medyo mabigat ang application) possibly yung heat transfer ng engine bay, yan po ang magpapa-init ng mga fluids para mag-normalized yung brakes, clutch, at steering.

[D3nb3r]

I think he's referring to the black Plastic Car Rivet Style Body and Trim Panel Fastener ClipsAttachment 23096
Best to look for it in auto accessories shops. Bring along a sample.

Yes po. That, and this one:



Yung clip kasi that I posted is usually mga 1 -2 time lang pwede baklas kabit if your careful. I just want to have some spares just in case I broke some of them during the process. I saw some seller posted this on olx but they dont seem to reply on the pm's.

[mangkas1178]

Yes po. That, and this one:



Yung clip kasi that I posted is usually mga 1 -2 time lang pwede baklas kabit if your careful. I just want to have some spares just in case I broke some of them during the process. I saw some seller posted this on olx but they dont seem to reply on the pm's.

Sir sa casa ang presyo P45, kong walang stock oorder two weeks makaroon na, you can find replacement sa cartruck almost same price at P43 pero medyo maluwag ang fit.

Sent from my GT-I9100

[D3nb3r]

Sir sa casa ang presyo P45, kong walang stock oorder two weeks makaroon na, you can find replacement sa cartruck almost same price at P43 pero medyo maluwag ang fit.

Sent from my GT-I9100

Yup casa will be the 1st choice if we want to look for any parts regarding our rides. Nag bakasakali lang ako maybe some guys here might know where to buy these parts other than casa (contingency I guess). Actually I have a strada so I posted this inquiry on both strada n monty threads since we both have almost similar clips/claw on our dash and door trim/panels. But thanks for the info and the price update anyway.

[iceman777]

I think he's referring to the black Plastic Car Rivet Style Body and Trim Panel Fastener ClipsAttachment 23096
Best to look for it in auto accessories shops. Bring along a sample.

boss sa concorde madami yan.

[miggymontero]

Sir miggymontero,

kailan po ba nag-occur yung hissing sound ng steering?! pag bagong start-up? during driving?!

para-macheck ko rin yun sa amin, so far wala pa naman akong naririnig na hissing sound related sa steering (nasa 6months old na yung monty namin at nasa 259 pa lang ang natatakbo) meron akong narinig dati na scraping sound (brakes), pero nawala rin after ko po pinatakbo ng 140KPH,

if in case na mag-occur po ito sa amin (wag naman sana) sabay ko ito sa pag punta ng casa for check up (pa-warranty ng HU dahil nagloko na ang TMPS)

bro playplugg nag occur ito after 1K. on/off siya kahit from startup and during driving. nawala lang after 5K and then ang pumalit yung clicking sound during hard turns.

Hopefully hind mag occur sayo bro.

[vickoy1228]

Sir vickoy1228,

Try nyo po, after start-up (bago i-drive after a long time rest ng sasakyan) idle nyo po at least 15 mins, o umangat yung gauge sa temp lagpas sa C, kahit sa unang guhit lagpas sa C, saka nyo i-drive normally... (kung patience enough, 30mins for normal range ng temp for idle, walang revolution, hindi naka-andar ang a/c). Na-observe ko lang po sa monty, once na nasa normal temp na yung engine yung mga fluids ng brakes, steering, clutch, in a very short period, normalized na... (kadjot ng clutch, hard steering saka yung brakes, medyo mabigat ang application) possibly yung heat transfer ng engine bay, yan po ang magpapa-init ng mga fluids para mag-normalized yung brakes, clutch, at steering.

Sir already doing that, kaso talagang lumalabas pag da drive na tas on & off. Hopefully mawala din sya pero will report it on my 5k PMS, based kasi sa pagbabasa ko ng mga forums may mga ganto ng problem since 2010 ang MS and the culprit is the rack & pinion kaya pinapa replaced nila sa casa, the other source of the problem is the steering column. Though based sa testimony ng mga nagpapalit lumalabas ulit ...bakit kaya di na resolve ng Mitsubishi to???