What's the most durable electric fan?/Electric Fans Talk

[vinj]

Iba ang design ng old school na electricfan

bushing na lang ginagamit ngayon sa shaft kaya hindi kasing tibay ng dati

mas matipid sa production side tsaka para mas malaki kita nila para bumili ka uli

I was looking at electric fans last weekend and when i was lifting them, they were all light and flimsy as compared to our old 3D Fans from the 1990s. The Hunter fans looked nice and classy but cost 7K

My Lola still has a functioning GE fan, the one that is all steel. Slow though.

[12vdc]

We had Union Hitachi fan mas matanda pa sakin pero just 2 yrs ago it gave up. Its well built, ambigat zinc alloy body, with mechanical timer, aluminum blades. Ang hindi ko lang nagustuhan sa old designs is yung bearing nya, ang hirap i-align. yung mga lumalabas ngayon spring loaded yung bearing/ bushing so flexible kahit hindi aligned.

Kahapon nasunog yung newly acquired union fan(hindi na yata hitachi) nalusaw ang spacer sa front and rear then sumabog capacitor. Mahihina na ang efans ngayon kasi puro plastics, others lack safety feature like thermal fuse kaya nasusunog. Malalambot din ang pyesa. so far ang gamit ko na medyo reliable ay Asahi brand industrial-type. Less plastic parts and no breakdown pa for 3yrs. Tip lang dapat malinis ang fan lalo na yung bearing area para tumagal.

[pup2]

Guys... reminder lang... it's dangerous to use stuck up fans... kahit metal yun, they can start a fire (from bitter experience)...

Our 3D "Retro" fans are still going strong... getting on time to clean them... the oldest one is getting kind of slow... but they've lasted longer than our other non-industrial fans... because the motors are so much bigger than most puny plastic fans.

Akala ko nabasa mo dati yung post ko dito about thermal fuses? They're only 20 pesos (or less) but are often removed if/when a fan is serviced -- unless you insist they put one and pay for it ...

[CLAVEL3699]

yung mga nilalagyan nang yelo worth mga 5k... ok ba yun?

[Chinoi]

Meron kami 2 Standard Stand fan, 2 panasonic wall fan, 1 Phillips Stand Fan yun may remote control. Buhay pa ngayun . Alaga lang sa linis at Engine oil ng Shell Syntetic oil gamit ko. Di na ko gumamit ng WD40 kahit yun Singer oil. Natutuyo kaagad at yun dahilan kaya nasusunog motor ng mga fan sa stuckup.

[niky]

Akala ko nabasa mo dati yung post ko dito about thermal fuses? They're only 20 pesos (or less) but are often removed if/when a fan is serviced -- unless you insist they put one and pay for it ...

Yeah.... read it... thanks for the reminder. Most likely, I'm going to clean this myself, to make sure the job is done properly.

[Reepicheep]

KDK ko dito sa room 1 decade++ na.

[Chinoi]

Akala ko nabasa mo dati yung post ko dito about thermal fuses? They're only 20 pesos (or less) but are often removed if/when a fan is serviced -- unless you insist they put one and pay for it ...

Meron kami ceiling fan dati na pinakialam ng di marunong. Tinangal yun fuse at direct connection ang ginawa. Na-stuckup yun fan ayun umusok at umapoy yun wire. Muntik masunog bahay namin. Buti nasa bahay ako nun mangyari. Tangalin ba naman yun protection fuse. Mula noon ako na maintain ng mga fan namin.

[EE100shiro]

ano matibay na electricfan sa SM appliances 2012 edition ?

KDK->wala pa kami fan na ito. Kawakita Denki Kigyosha translated as Kawakita Electric Company known as "KDK" is the brand name used by Matsushita Ecology Systems Co.,Ltd., a separate company of The Matsushita Electric Industrial Group.

ASAHI ->wala pa kami fan na ito

standard 3D madali masira cheap plastic

national panasonic okay pa ung motor kaso hindi na umiiling

[Noel Salisipan]

yung mga nilalagyan nang yelo worth mga 5k... ok ba yun?

Eto Bro, ok naman;





Tubig + Gel ice in container + ice para malamig talaga.
Pero pag merong may ubo sa kwarto, better na huwag gamitin yung cooler/humidifier.


Ok din yung "misting", di mo na kailangang bumili ng nebulizer!hehehe