Tupperware PC

**BlueBimmer** · October 16th, 2007 12:40 PM

gh, y mo benta cafe?

**Taurus** · October 16th, 2007 01:06 PM

parang ang init sa loob, I would suggest some holes on the top since hot air rises.

**BlueBimmer** · October 16th, 2007 01:23 PM

better yet, an exhaust fan at the top

**wildthing** · October 16th, 2007 01:58 PM

Nice project...

saan merun nagbebenta ng mini-ITX dito?

**MXFX** · October 16th, 2007 02:26 PM

nice!

meron ding mga 60+ watt dc inverter board tapos adapter para magkasya sa isang set ng tupperware:

ganito yung ginamit ko sa 800mhz mini-itx ko, nagkasya lahat sa kahon ng itx mobo

**ghosthunter** · October 16th, 2007 02:37 PM

Originally Posted by MXFX

nice!
meron ding mga 60+ watt dc inverter board tapos adapter para magkasya sa isang set ng tupperware:

I would prefer using that instead of the PS I used. Unfortunately I couldn't find a place which sells those here.

**MXFX** · October 16th, 2007 02:49 PM

even here in socal, i still have to order parts online. got my things at idotpc.com for about $60 for the inverter and the adapter. looks like their cases got a little cheaper.

i also suggest placing your ps on top so heat rises without passing to the board, may or may not help.

**ghosthunter** · October 16th, 2007 02:44 PM

Originally Posted by wildthing

Nice project...

saan merun nagbebenta ng mini-ITX dito?

Abacus Micro Computers
3rd floor, Virra Mall, Greenhills

**ghosthunter** · October 16th, 2007 02:56 PM

Originally Posted by Taurus

parang ang init sa loob, I would suggest some holes on the top since hot air rises.

I want to keep the "case" as clean of visible holes and vents as much as possible. But you can notice in the picture below that hot air will be blown out via the rear cut-out area that is used for the connectors.