2011 Mitsubishi Montero Sport [continued]

**prince777** · June 30th, 2012 12:06 AM

You got PM sir t_m....

**prince777** · July 1st, 2012 12:32 PM

Thank you sir rossph for getting the keyfob.

**zix888** · July 1st, 2012 07:08 PM

i had the whole day thinking of a diy, nangangati kasi hands ko, hehe. first i tried to put auto-up function on the power windows. yeah i had it working all the way up, but the problem was it needed something pa to trigger the relay coz the motor wont stop running even when the window is already closed, so i just packed up with the auto-up, and when i was assembling the switch, i noticed that the led didnt match the combi meter, so i just replaced it

**zix888** · July 1st, 2012 07:29 PM

still had plenty of time after the led replacement, so i proceeded with the led installation on the + - indicator on the sports mode

after disassembling all the rear and front center console
,found out that this is another dead end diy,

there were no opening on the + - signs, the light will not pass thru, i even tried to shave it, maybe i could get away with it, but there was nothing that could be done( packed up diy, again) . when i was assembling the rear center console, i noticed that there was no light there inside the center console, and i thought it should have just like the glove compartment, and that is what i did instead. hindi naman nasayang ang pagbaklas, hehe

plus installed built-in retractable iphone/ipad/itouch charger and another for my pocket wifi. so that yung oem 12v sockets are always available for othe purposes

and lastly, i made a little modification on the wiring of my seatbelt warning/alarm. it is now speed based, go 20kph w/0 seatbelt will trigger the alarm. ayun medyo nawala yung pangangati nung hands ko after

**111prez** · July 1st, 2012 07:36 PM

galing talaga ni zix sa DIY ng monty

kudos

**hachooro** · July 1st, 2012 08:24 PM

ang ganda nung sa window switch....di lang talaga ako marunong sa mga electricals eh..haay..magiging DIY destroy it yourself --- mahirap na.

galing sir zix!

**randybm** · July 2nd, 2012 05:11 AM

Originally Posted by zix888

Finally made it, my rear camera is now working. Thanks sir tuazon7. Just Plug the video cable, then supply the blue wire labeled "reverse" with the positive terminal of the reverse light

‪Montero sport gtv‬‏ - YouTube

Here is a video on removing the HU cover

‪Montero sport gtv‬‏ - YouTube

sir zix for video direct plug sya a likod ng HU then supply ng power(12V) thru reverse light + terminal_?tia

**zix888** · July 2nd, 2012 07:44 AM

Originally Posted by randybm

sir zix for video direct plug sya a likod ng HU then supply ng power(12V) thru reverse light + terminal_?tia

yup thats correct. i suggest na maglagay ka rin extra wires for future use, para isang paglay out na lang, so hindi sayang baklas mo

**glaks** · July 2nd, 2012 07:45 AM

master ka talaga sir zixx. btw sir ano po ba kailangan para paganahin yung 12v sockets sa loob ng console box

**zix888** · July 2nd, 2012 08:17 AM

Originally Posted by glaks

master ka talaga sir zixx. btw sir ano po ba kailangan para paganahin yung 12v sockets sa loob ng console box

sir working naman yung 12 sockets sa console box, baka na-overlooked lang yan sir. madali lang yan, if thats the case, just lift the cup holder, after removing it, nandun yung connection, may connector yan, malamang na unplug