2010 Mitsubishi Strada [continued]

[doy]

thanks maganda rin yung M2 bagay sa pickup. post ka ng strada pic mo sir. hehe

Try mo din ang 16x8 with 6 on 5.5 bolt patern, 0 offset nito (matte black finish):

http://www.procomptires.com/truck-je...st-wheels.aspx

Especially yung 7031.



Around P35,000+ dito sa probinsya.

[locoroco777]

Sa 38psi lang kase even ang tread wear ng front tires tapos sa 28psi for the rear (no cargo). Pag-30psi kase ang front ko, sa shoulders ng tread na ang wear lalo na pag highspeed turning. Di naman sobrang tigas ang 38psi (max psi is 50 for 31x10.50 tires).

ahh...I see....thanks for the input sir...its my first time to get hold of that helpful info...

how bout sa steering sir? inde ba parang lutang or malambot masyado to turn the steering wheel?

I remember one time kasi, pransis, one of our co members told me that when his mags were new...on the road his way home he noticed that the steering wheel was very light to turn..So I assume na yun na nga yung parang lutang ng steering wheel, and then when he's gone to measure the tire pressure it was 40 psi...so ayun nga hehe...

[doy]

ahh...I see....thanks for the input sir...its my first time to get hold of that helpful info...

how bout sa steering sir? inde ba parang lutang or malambot masyado to turn the steering wheel?

I remember one time kasi, pransis, one of our co members told me that when his mags were new...on the road his way home he noticed that the steering wheel was very light to turn..So I assume na yun na nga yung parang lutang ng steering wheel, and then when he's gone to measure the tire pressure it was 40 psi...so ayun nga hehe...

Steering response is similar with the stock 205/80r16 tires with 16x6 wheels (+46 offset) with 32psi (recommended for front).

[doy]

Pressure readings pala were taken on mornings before travel (cold air) for accuracy (ordinary air inflation only, not nitrogen).

[shakatak70]

thanks maganda rin yung M2 bagay sa pickup. post ka ng strada pic mo sir. hehe

As Promise ... lumang pic lang na post ko na dito ito dati

[locoroco777]

^^ ganda truck mo sir shak!! quartz brown pa! favourite color ko...

[leoocampo]

i just bought a strada glx last aug 25 and i want to be a member of the strada club. when is the next eb?

last friday, diamond motors installed my 3m tints. i noticed that the 3m print label can only be found on the windhield tint. there are no 3m labels on the windows and the rear window. i asked my sales agent about it and this was his reply, "sir isang buong sasakyan na kasi sukat ngayon ng 3m...ang meron na lang windhield...pero yung gilid wala na." i am having second thoughts if i should buy his explanation especially after having read one of the faqs of 3m in this site: question: i was once told that not all 3m tints have print marks or logo. is this true? answer: false. all 3m automobile tints have print marks. if it does not have a print mark, it is not 3m.
i am thinking of having my tint checked by somebody from 3m. please help. i don't know if i should believe my sales agent. thank you.

[shakatak70]

^^ ganda truck mo sir shak!! quartz brown pa! favourite color ko...

Thanks for the compliment sir, na-inspire lang ako sa iyong Strada kaya nagkapagpalit ng sapatos. :thumbup:

[bigtrak]

Try mo din ang 16x8 with 6 on 5.5 bolt patern, 0 offset nito (matte black finish):

http://www.procomptires.com/truck-je...st-wheels.aspx

Especially yung 7031.



Around P35,000+ dito sa probinsya.

Thank you Sir Doy! ma angas din. gusto ko yung 7069 and 7032. pero iba parin ang mamba.

[bigtrak]

As Promise ... lumang pic lang na post ko na dito ito dati

thanks mga idol! 18 inch yan sir? naging matagtag po ba since less ang tire? newbie question pag higher than 16 wheel ba mag babago ang turning radius?