2010 Mitsubishi Strada [continued 2]

[nismo26]

Huhuhu my Baby got another hit and run, tamang tama sa avatar ko hehehe

daming ng tama strada mo TC... pero maayos na rin yan... di naman pwedeng pagalitan yung driver diba? kung saan-saan siguro naka park? hehe

Sa landas ng Kalsada, dalawang daan ang disgrasya Ang Maka bangga ka or ang ikaw ang mabanga . . . kaya wag kalimutan ang insurance i renew ng me katuwang ka sa pag papa ayus ng ating mahal na Strada!

tama, probs lang kung wala ng pang insurance....

ewan ko ba bro i think Strada has a nice Butt kaya laging may nag kikiss time na siguro magipon ng pang bumper sa likod pareho kay Manong Sael to make it more nicer look sa likod and pag binangga matibay hehehe

isabay mo na lang kay sir Boyet, balak din atang magpalit ng rear bumper

[Boz]

Sir paano po sinusukat ng ganyan 'yung treadwear?

Sir, just buy caliper sa suking hardware store (Handyman), mura lang. Yung may metal na sumusukat sa depth. I read somewhere na safe ang tire up to 4/32" tread depth.

[jojitb]

nakabili na ako nang spare tire. mags nang pajero. problema di ko maikabit sa strada ko hhuhuhu!

malaki ang butas niya sa gitna, yun bracket nang spare wheel parang 2-3 inches lang and yun butas mga 5 inches yata. maliit lang ba talaga butas sa gitna nun spare wheel nang strada? paano ba ito?

[ThePatriarch]

For those who are looking for spare tire replacements, available pa yung glx mags and tires ko (2 pcs) hehe.. PM me na lang

[Avaris008]

the store is close to sogo hotel in banawe, same side as sogo. you can't miss it. also close to ling nam and teriyaki boy.

regarding paj ralliart mags. got to drop by this shop last week. meron nga sila! kaya lang used na. 18k for the set. thanks parin for the tip.

mukhang makakakuha na ako sa evangelista. sa wheelers. rota daw may gawa. meron sila on display black saka dark brown. pero makakapag padeliver daw sila next week ng original color, gray (na may pagka bronze). 23k wala pang tawad. ano sa tingin nyo dito? mag post ako ng pic pag nakita ko na.

tapos binalak ko nang tumingin ng pireli scorpion ATRs. kaya lang out of stock lahat sa evangelista. malakas daw benta, dahil magaling nga siguro. kelangan pa mag hanap ng ibang options para sa goma kung hindi magkakaroon in the near future.

[dBoss]

Ngayon ko lang na review ang mga threads for Strada. Sa SCV and the dirty fuel lang kasi ako nakatutok.

I would like to ask the ff since I am due na for a 1000km PMS:

a) How do you know if you have uneven stance? I will use a measuring tape? in case I saw an error, what is the acceptable error?? Initially "dangkal" lang a basis ko, I obeserved na mas mababa ang nasa driver side... this can easily be corrected naman sa casa, diba?

b) "ingay sa leaf spring" -- may narinig akong mahina, I asked my kid to go on top of the bed and yugyugin up and down may narinig ako sa driver's side, pag lagyan ko na rin sya ng silencer...

------ pag correct ng stance and pag lagay ng silencer is easy to correct di ba? this can be done in less than an hour??

c) Step board ko, saw pitting corrossion (tuldok na rust), it seems aluminum coated lang pala siya part kaya ito sa warranty? or may work-around through DIY?

TIA

[shakatak70]

Ngayon ko lang na review ang mga threads for Strada. Sa SCV and the dirty fuel lang kasi ako nakatutok.

I would like to ask the ff since I am due na for a 1000km PMS:

a) How do you know if you have uneven stance? I will use a measuring tape? in case I saw an error, what is the acceptable error?? Initially "dangkal" lang a basis ko, I obeserved na mas mababa ang nasa driver side... this can easily be corrected naman sa casa, diba?

Casa will measure it by tape (with OEM mags installed) this can be done in a very short time, just ask the SA to include the chewking of uneven stance. Acceptable error...I read it somewhere in this thread around 10-20 mm. Correcting the issue may depend on the gravity and availability of the defective parts. In my case, until now I'm still waiting for the parts to be replace. Leaf and coil spring have to be replace, dumating na yung isang parts and still waiting for the other to arrive.

b) "ingay sa leaf spring" -- may narinig akong mahina, I asked my kid to go on top of the bed and yugyugin up and down may narinig ako sa driver's side, pag lagyan ko na rin sya ng silencer...

------ pag correct ng stance and pag lagay ng silencer is easy to correct di ba? this can be done in less than an hour??

Regarding naman sa ingay ng leaf spring (the ek-ek sound) madali lang nilang remedyuhan yun. Repositioning lang (niluluwagan lang) ginagawa ng casa dun sa bolt na nasa leaf spring (aminado sila na di maganda yung quality ng plastic na nakakabit dun kaya umi-ingay). Mine also have some ek-ek sound before at noong nagpa-PMS ako ginawan ng paraan yun hanggang ngayon wala naman ingay.

c) Step board ko, saw pitting corrossion (tuldok na rust), it seems aluminum coated lang pala siya part kaya ito sa warranty? or may work-around through DIY??

TIA

di kaya may speck of metal na naiwan sa step board habang basa yung part na yun (contact of dissimilar material will cause corrosion)? Anyway, since I haven't experience this, baka pwede mo ipasok sa warranty kung maliit lang naman siya pwede mo na ipa- paki sa casa. Pero ang pagkakaalam ko yung step board natin ay aluminum.

[dBoss]

Casa will measure it by tape (with OEM mags installed) this can be done in a very short time, just ask the SA to include the chewking of uneven stance. Acceptable error...I read it somewhere in this thread around 10-20 mm. Correcting the issue may depend on the gravity and availability of the defective parts. In my case, until now I'm still waiting for the parts to be replace. Leaf and coil spring have to be replace, dumating na yung isang parts and still waiting for the other to arrive.



Regarding naman sa ingay ng leaf spring (the ek-ek sound) madali lang nilang remedyuhan yun. Repositioning lang (niluluwagan lang) ginagawa ng casa dun sa bolt na nasa leaf spring (aminado sila na di maganda yung quality ng plastic na nakakabit dun kaya umi-ingay). Mine also have some ek-ek sound before at noong nagpa-PMS ako ginawan ng paraan yun hanggang ngayon wala naman ingay.



di kaya may speck of metal na naiwan sa step board habang basa yung part na yun (contact of dissimilar material will cause corrosion)? Anyway, since I haven't experience this, baka pwede mo ipasok sa warranty kung maliit lang naman siya pwede mo na ipa- paki sa casa. Pero ang pagkakaalam ko yung step board natin ay aluminum.

Thanks answering my queries !!

On the uneven stance, the issue is on the rear part of the truck and not in the front?

On the stepboard - will check it again and take some pictures to have a better look..

[jim]

Hi everyone! I will be getting my GLX next month. I know there are a lot of quirks with regards to the vehicle but I realy love it and it is bang for the buck. I opted for the GLX as I do not need a 4x4 and wanted a manual tranny. No ABS/EBD I can live as my first vehicle was a Toyota Mini Cruiser. I only found ABS useful when I got my third car.

One question. Any feedback from Jabez in Dasmarinas Cavite? They have been quite welcoming and kind. You guys may have experiences with them. I just want to know.

Thanks!

[RTS]

Hi,
My daughter gave me an advance xmas gift, new seat covers for my strada & her monty. Leatherette from MG ,sabi nila ito raw ang bago they called it Heat Reduction material . I have to find out kung heat reduction nga, pogi ang dating , kaya lang its not my choice mas gusto ko yung like stock material, dahil sa libre, thank you na lang.

RTS