House Constuction [Merged]

**qman** · January 21st, 2006 02:21 PM

Mga peeps, i need ideas

Im about to embark sa project nato. ano na ba ang recent rate per SQM sa construction ng house?

Is the attic included sa computation ng SQM pagka na quote ka na?

What is the best approach? Structural lang, semi finish or full na.

Anybody here dealt with Vazbuilt? (Pre Fab Approach nila with 15 years structural warranty)

Thanks for the input

**van_wilder** · January 21st, 2006 06:36 PM

okay ang vazbuilt...

normally kami 15-20k per square meter ang gawa namin...
pero yun iba siyempre higher... medyo mataas kami kasi we dont want to compromise anything (labor, materials, etc.)

yun sa vazbuilt okay yan mababa and okay ang pre-fab... we also do that for low-cost housing community projects namin...

floor area ang computation ng per square meter na presyo hindi lot area...

so bale 1st floor + 2nd floor + attic...

**swordsman** · April 9th, 2007 03:47 PM

Originally Posted by van_wilder

okay ang vazbuilt...

normally kami 15-20k per square meter ang gawa namin...
pero yun iba siyempre higher... medyo mataas kami kasi we dont want to compromise anything (labor, materials, etc.)

yun sa vazbuilt okay yan mababa and okay ang pre-fab... we also do that for low-cost housing community projects namin...

floor area ang computation ng per square meter na presyo hindi lot area...

so bale 1st floor + 2nd floor + attic...

what if kung yong owner ang mag-supply ng materials, all the rest sa inyo(contractor), gaano ibababa from 15-20K?(if you accept this type of setup)

**zoom zoom** · April 10th, 2007 05:12 PM

Originally Posted by swordsman

what if kung yong owner ang mag-supply ng materials, all the rest sa inyo(contractor), gaano ibababa from 15-20K?(if you accept this type of setup)

Two options:

Cost-Plus: The owner pays for the materials and labor, the Construction Management Team gets a certain percentage of the sum (5-10%).

Labor-only: Cost would vary from 7,500-10,000 per sqm, depending on the finishes.

We do accept this type of setup also,

See www.contractrenovate.com

**van_wilder** · April 13th, 2007 01:05 AM

we dont join biddings.

**_Qwerty_** · April 13th, 2007 12:29 PM

hi zoom zoom,

what exactly did you do for Bonifacio Ridge?

Originally Posted by zoom zoom

Two options:

Cost-Plus: The owner pays for the materials and labor, the Construction Management Team gets a certain percentage of the sum (5-10%).

Labor-only: Cost would vary from 7,500-10,000 per sqm, depending on the finishes.

We do accept this type of setup also,

See www.contractrenovate.com

**zoom zoom** · April 13th, 2007 03:02 PM

Originally Posted by Dvorak

hi zoom zoom,

what exactly did you do for Bonifacio Ridge?

For Boni ridge, we "Buildmate" supplied materials for Maxco, unfortunately up to this date the payment hasn't been settled

**boybi** · January 21st, 2006 08:33 PM

pano ba ang kwentahan nyang per square meter na yan? how much ang mass housing, ang townhouse style, ang mansion, etc.?

**hens** · January 23rd, 2006 12:34 PM

Originally Posted by boybi

pano ba ang kwentahan nyang per square meter na yan? how much ang mass housing, ang townhouse style, ang mansion, etc.?

Hanef!!! Mansion na yung tinatanong mo ah..

**NightRock** · January 24th, 2006 01:19 AM

Originally Posted by boybi

pano ba ang kwentahan nyang per square meter na yan? how much ang mass housing, ang townhouse style, ang mansion, etc.?

Mag papagawa ng mansion... tapos ipag papagawa pa ng housing ang mga employee.. at naka townhouse ang mga supervisor level hehehehe.. bussines magnate talaga ng tarlac hehehe