Mazda3

[Bravoexo]

Sir, thanks for replying.
Ipacheck ko yung Radiator Fan and Ignition Coils. Paano nga pala malalaman kung need na palitan?

Halata kaagad if the coils are failing... massive engine shaking...parang uneven yung tunog at ramdam mo, parang nanghihingalo sya to the point of it almost parang mamatay matay siya.

Rad fan assembly, they normally test speed of the fan at the casa... mahal nga lang, > 50k yung fan assemblhy alone...ugh.

Saka ano po yung drive shaft? normal lang po ba na need talaga siyang palitan? eto naman yung recommendation ng mismong casa.

Only if you break it off...lol. Which actually happened to me. caused by a failed engine mount #4


Anyway, try doing the idle reset. Start the car, let it idle for 20 minutes. This reset and programs the ECU and MAF to accomodate how dirty the trottle body and intake manifold / idle controller are...

you'd normally do this everytime the battery gets disconnected...coz it needs to reprogam the MAF/ECU

[itsrainening]

Halata kaagad if the coils are failing... massive engine shaking...parang uneven yung tunog at ramdam mo, parang nanghihingalo sya to the point of it almost parang mamatay matay siya.

Rad fan assembly, they normally test speed of the fan at the casa... mahal nga lang, > 50k yung fan assemblhy alone...ugh.




Only if you break it off...lol. Which actually happened to me. caused by a failed engine mount #4


Anyway, try doing the idle reset. Start the car, let it idle for 20 minutes. This reset and programs the ECU and MAF to accomodate how dirty the trottle body and intake manifold / idle controller are...

you'd normally do this everytime the battery gets disconnected...coz it needs to reprogam the MAF/ECU

Thanks sir, gawin ko po yan. how about sa Stereo system ng mazda, pede ba siya lagyan ng aux out? 2005 model po.

[tenoates]

Which shop can repair the Knock sensor of my 2007 Mazda 3? Any good shops in makati area and also any parts supplier where I can buy this sensor? Tia!