Mazda 3 brake problem

**loubertleyva** · February 18th, 2014 12:06 PM

Good Day!!
i have some problems about our mazda 3 brakes, kc everytime na malulubak ako or sudden brakes bigla nlng lalalim yung brake pedal nya, kaya medyo kakabahan ako kasi medyo hihina yung brakes nya, pero after ko ipump ung brake pedal babalik sya sa dati, ano kaya yung problems nya s brakes?

**Bin Diesel** · February 18th, 2014 12:57 PM

check mo level ng brake fluid baka paubos na

**jodski** · February 18th, 2014 02:05 PM

Verify mo rin kung kailan ka last time nag pa bleed and renewal ng fresh brake fluid? Napa check mo na rin ba kung may leaks?

**loubertleyva** · February 18th, 2014 02:53 PM

There's no leak naman po

**loubertleyva** · February 18th, 2014 02:54 PM

Originally Posted by Bin Diesel

check mo level ng brake fluid baka paubos na

Ok naman po yung level ng brake fluid

**Bin Diesel** · February 18th, 2014 03:13 PM

Originally Posted by loubertleyva

Ok naman po yung level ng brake fluid

Sir try this, may help you diagnose para di ka lokohin kapag nagpagawa ka.

Troubleshooting a Low or Sinking Brake Pedal

**7138** · February 18th, 2014 03:14 PM

If you are sure na walang leaks sa brake master, and inside the cabin sa brake pedal.

pa-bleed mo brake system mo, might be trapped air bubbles kaya ganyan brakes mo.
at the same time, check brake pads and pacleaning ka nadin ng brake drum shoes.

If you had these done and medyo lumulusot padin yung preno,
might be palitin na yung piston ng brake master mo, pwedeng i-repair kit yan
or kung medyo na-ukit na yung cylinder, brand new brakemaster assembly na ang solution dyan.
pero either way, if ako ang may-ari ng kotse, palit nalang ako ng OEM brake master assembly.

maging top priority mo yang preno sir.

**loubertleyva** · February 18th, 2014 05:35 PM

Originally Posted by 7138

If you are sure na walang leaks sa brake master, and inside the cabin sa brake pedal.

pa-bleed mo brake system mo, might be trapped air bubbles kaya ganyan brakes mo.
at the same time, check brake pads and pacleaning ka nadin ng brake drum shoes.

If you had these done and medyo lumulusot padin yung preno,
might be palitin na yung piston ng brake master mo, pwedeng i-repair kit yan
or kung medyo na-ukit na yung cylinder, brand new brakemaster assembly na ang solution dyan.
pero either way, if ako ang may-ari ng kotse, palit nalang ako ng OEM brake master assembly.

maging top priority mo yang preno sir.

Pero sir bakit s tuwing malulubak lang ako nalalim yung preno nya as in yung mabilis yung takbo ko tapos biglang malulubak ng malalim dun sya nalalim

**jodski** · February 18th, 2014 06:35 PM

Originally Posted by loubertleyva

Pero sir bakit s tuwing malulubak lang ako nalalim yung preno nya as in yung mabilis yung takbo ko tapos biglang malulubak ng malalim dun sya nalalim

Sir hindi normal yang ganyan... better have it checked muna for leaks and start from there... we can't say directly what's wrong based sa ganyan lang na description

Thanks