2011 Hyundai Accent Modification/ Accessories made

[batang_raon14]

Weekend DIY

[bloowolf]

Guys, I've set my sights on a set of mags with the following specs:
15x7.5J
ET 30
I plan to pair it with a set of 195/60/15 tires with a with of 7J.

I chose bigger tires since I really hate scraping the humps in our village. My questions are:
Will the 7j fit the 7.5j wheels?
Will it cause any safety issues since I travel the expressways daily
Will it cause rubbing of the fenders & shock mounts?

Any inputs will be highly appreciated.

[Audison234]

Guys, I've set my sights on a set of mags with the following specs:
15x7.5J
ET 30
I plan to pair it with a set of 195/60/15 tires with a with of 7J.

I chose bigger tires since I really hate scraping the humps in our village. My questions are:
Will the 7j fit the 7.5j wheels?
Will it cause any safety issues since I travel the expressways daily
Will it cause rubbing of the fenders & shock mounts?

Any inputs will be highly appreciated.

I installed 195/50R16 tires with 16x7JJ ET40 alloy wheels on my Accent hatch. Couple of issues: The wheels just barely cleared the brake calipers. Also, the tire side wall extends a bit out of the wheel well so mud gets slung onto the fenders.

A 7.5 inch width rim is too wide for the cross section width of the tire you plan to use (195 mm or 7.67 inches). Per my research a 6.5 inch rim is the ideal match, but you can stretch it out to 7 inches at most.

[bloowolf]

I installed 195/50R16 tires with 16x7JJ ET40 alloy wheels on my Accent hatch. Couple of issues: The wheels just barely cleared the brake calipers. Also, the tire side wall extends a bit out of the wheel well so mud gets slung onto the fenders.

A 7.5 inch width rim is too wide for the cross section width of the tire you plan to use (195 mm or 7.67 inches). Per my research a 6.5 inch rim is the ideal match, but you can stretch it out to 7 inches at most.

Thanks for the reply bro. Actually, I did not push it with the wheels anymore. I was really concerned that it will scrape onto the shock mounts & might have issues with the warranty of the car. I am now looking for a15x 6-6.5JJ wheel instead.. It's a shame cause I really like the design

[meggieboy]

I just wanted to share mine

[glennhmd]

I have done an EGR block the first week i got my nissan navara (the very first mod i made on it) and six years down the road and my navara still pulls and punches like a sledge hammer. No mechanical problems thus far.

Has anyone done an EGR blanking mod on the hyundai accent CRDI? how easy or difficult would it be to do on a CRDI accent (it was very easy to do on the navara)? any long-term observations for those with EGR blanking mods out there?

[Tricioman_]

Mga Sir, Tanong ko lang po kapag ba pinalitan ko stock HU ko ng Pioneer HU A/V sa labas maapektuhan ba warranty ko?

[Tricioman_]

Mga Sir, Tanong ko lang po kapag ba pinalitan ko stock HU ko ng Pioneer HU A/V sa labas maapektuhan ba warranty ko?

Mga Sir, Nakabili na po ako ng HU sa MASPRO kay sir Benjie. Okay talaga siya kausap, Talagang sinusupervised nya mga tao nya!

BTW, Kapag Plug n Play lang po ang ginawa nila hindi void ang electrical warranty tama po ba mga sir? Thanks sa mga inputs

[maxhedrum]

2011 sedan ride ko and I find na napakalambot nung stock springs. Meron bang alternative dito? Yung newer models ba firm na yung springs?

Sent from my SM-G925F using Tapatalk

[maxhedrum]

Btw changed the shocks to nitro, nagimprove ng konti.

Sent from my SM-G925F using Tapatalk