Results 1 to 10 of 21
-
March 29th, 2009 02:34 AM #1
tanong lang anu ba mas correct na driving style para sa mga matic
1. (when accelerating) you just press it steadily, as in single position lang pero mas mas lubog yung tapak. then bahala na siya magshift-up nang sarili nya
2. or yung parang pitik-pitik lang na tapak, yung parang binobomba mo yung gas pedal para mapwersa sya magshift-up
alin din ba mas ayos sa fuel efficiency
-
-
March 29th, 2009 12:54 PM #3
Pag binomba mo ang gas pedal,- malamang mag-down shift pa iyan....
7707:band:
-
March 31st, 2009 03:47 AM #4
Gradually push the pedal to gain speed. To accelerate fast, quickly press pedal hard twice to downshift.
A general rule on driving A/T, keep a light foot.
-
March 31st, 2009 08:48 AM #5
1. Gradually press down on the accelerator
2. When you feel the gear shift release and repeat from 1.
You can also just depress the accelerator but you'll have a lot of shift jolts and worst fuel consumption.
-
-
March 31st, 2009 09:23 AM #7
If your throttle is drive-by-wire (DBW), just gradually press on the accelerator pedal and keep it there. There's no need to release it everytime the A/T shifts. The DBW system will adjust the throttle position on every shift point to assure a smooth ride.
Jack-rabbit starts will kill you FE and probably overheat your ATF.
-
March 31st, 2009 09:33 AM #8
dahan dahan apak lang po. kung pwede eh wag mo paabutin lagpas 2000rpm ang pag apak para hindi malakas ang consumption
-
March 31st, 2009 09:35 AM #9
-
Tsikot Member Rank 4
- Join Date
- Jan 2007
- Posts
- 2,326
March 31st, 2009 03:39 PM #10
As expected, in response to Tesla’s entry into the Philippines market, Ford will be bringing in the...
Tesla Philippines