Jemson Thread [new number]

[bwiseat]

I've been back reading the thread for few days already. Ang daming positive comments. I'm planning to go sa shop nila Jemson. Eto yung mga papagawa ko, pa-advice naman if kaya nila. TIA mga sir.

1. Rewiring - yung mga wires sa loob ng sasakyan saka yung sa mga headlights and fog lights. Medyo pumapalya kasi paminsan-minsan yung mga lights saka parang hirap yung power windows pag paangat. Sobrang bagal lalo na pag sabay. Yung sa revo kasi namin, hindi naman ganun.

2. Alignment of the sun roof switch - dalawa kasi yung switch ng sun roof ko, meron for vertical (tilt), meron for horizontal (open and close). Before kasi ipagawa yun nung nasira, dapat nasa 9 and 3 oclock horizontal position siya. Ngayon kasi yung vertical switch niya pag naka-todo, mga 20 degrees angle pa yung position niya, so need po pindutin yung horizontal switch at mag trial and error para mapunta siya sa 9 and 3 oclock horizontal position.

Nissan Exalta STA pala yung auto ko. Pahabol pala, magkano pa convert ng radiator to aluminum sa shop ni Jorge? Papaconvert ko yung ilalim. May konting leak kasi dun sa A/T Oil cooler. Salamat mga sirs!

AFAIK kayang kaya ni Jemson yan. Mahusay talaga no question at mabait pa. Nung may pinagawa ako sa kanya nun sa speedometer ko, baklas dashboard di ako siningil ng extra. hehe!

As for the radiator, I suggest personal mo na itanong para makatawad ka din if ever. Maayos naman sila kausap.

Or tawag ka sa kanila through the updated number on this thread.

[d'flash]

sa mga nakapag pagawa na ng sirang fuel gauge, magkano inabot labor? or posible pa ba na magawa yun? ayos pa naman ang speedometer at temp. thanks

[OTEP]

sa mga nakapag pagawa na ng sirang fuel gauge, magkano inabot labor? or posible pa ba na magawa yun? ayos pa naman ang speedometer at temp. thanks

Yung float po was around 850. Labor was around 400. Sariling bili ko po yung float. If your vehicle requires the tank to be removed, mas mahal labor. Sana po sa gauge lang mismo ang problem.

[mark1985]

Got my ground issues solved today. Backjob C/o eroy. Happy customer here.hehe mukhang mapapadalas ako dun ah. :D

Sent from my H100 using Tsikot Forums Mobile App mobile app

[OTEP]

Got my ground issues solved today. Backjob C/o eroy. Happy customer here.hehe mukhang mapapadalas ako dun ah. :D

Sent from my H100 using Tsikot Forums Mobile App mobile app

Hindi tayo nag abot sir. Was there also with a radiator backjob before lunch.

[Pipefish]

Why do you have back jobs? Does that mean the first job wasn't done properly?

Sent from my Galaxy Note

[OTEP]

Why do you have back jobs? Does that mean the first job wasn't done properly?

Sent from my Galaxy Note

Most of mine were due to faulty parts even if installed properly. Sometimes I have a sudden change of mind about something I have installed and want it adjusted or done a bit differently.

[d'flash]

Yung float po was around 850. Labor was around 400. Sariling bili ko po yung float. If your vehicle requires the tank to be removed, mas mahal labor. Sana po sa gauge lang mismo ang problem.

ok naman sir ung float ko. ung mismong gauge lang daw talaga ung sira, kaya po ba nila jemson gawin yun? bukas ba sila tomorrow?

[hellboy]

^ I was there this morning, around 9 dumating si Jemson, si mang Jorge hindi papasok ngayon.

[mark1985]

Sayang di tau nagabot doc! Dibale mapapadalas nako dun.hehe happy new year guys!

Sent from my H100 using Tsikot Forums Mobile App mobile app