Chery QQ3: Should I or should I not?

**pitbullz** · November 20th, 2009 03:24 PM

yaiks...parang SUV na yan a...maybe worse

i wonder whats the deal with i10...it seems that the picanto is doing just fine

**niky** · November 20th, 2009 05:20 PM

Maybe it's the extra power or new emissions equipment? When we tested the 1.1, we got decent economy, actually. Better than the QQ or the Benni. Still a far cry from the Alto... but the Alto is a featherweight with an engine that's just 2/3rds the size.

**esojose** · August 31st, 2010 08:47 AM

Hi Guys,

palitin na yung 2 front wheel bearing ko. singil sakin sa casa is 6-7k lahat lahat kasama na machine shop.

im planning na ipagawa nalang sa labas. standard kaya yung wheel bearing neto or better yet sa casa ko nalang ipagawa??? need advise.

My chery QQ is 2 years and 7 months old na po ^_^

**oj88** · August 31st, 2010 12:09 PM

Originally Posted by esojose

Hi Guys,

palitin na yung 2 front wheel bearing ko. singil sakin sa casa is 6-7k lahat lahat kasama na machine shop.

im planning na ipagawa nalang sa labas. standard kaya yung wheel bearing neto or better yet sa casa ko nalang ipagawa??? need advise.

My chery QQ is 2 years and 7 months old na po ^_^

Just out of curiosity, why is there a machine shop involved? This is casa we're talking about after all.

**niky** · August 31st, 2010 12:48 PM

Originally Posted by oj88

Just out of curiosity, why is there a machine shop involved? This is casa we're talking about after all.

Probably to press out the wheel bearings.

You can probably get this done much cheaper outside. Most shops should know that the QQ bearings are the same as the Daewoo Matiz and Chevrolet Spark.

**dr. d** · September 3rd, 2010 07:34 PM

we used to replace our own wheel bearings back in the 70s. we would use a 2 x 2 width piece of wood, 6 to 9 inches long or so, in lieu of the machine press. easy but messy. today, many will just bring it to the machine shop and pay several hundreds of kesos for the press-out press-in service.
bringing it to the casa is probably the easier but more expensive option.

**marg** · September 3rd, 2010 07:51 PM

Originally Posted by esojose

Hi Guys,

palitin na yung 2 front wheel bearing ko. singil sakin sa casa is 6-7k lahat lahat kasama na machine shop.

im planning na ipagawa nalang sa labas. standard kaya yung wheel bearing neto or better yet sa casa ko nalang ipagawa??? need advise.

My chery QQ is 2 years and 7 months old na po ^_^

2.5 years old lang sira na yung bearings? Inferior quality ang bearings na ginamit sa Chery.

Get a sample, bring it to Manila Bearing Center (http://www.bearing.ph) and get the quality replacement brand like Timken SKF NTN etc. at 1/4 the price.

**pugeesoj** · February 6th, 2011 07:35 PM

Haayyy... ngayon naman shock absorber sa harap ang problema. malangitngit na. 3 year old chery QQ. meron ba nabibili neto sa labas para sa labas ko nalang ipagawa?

chery manila kasi 3 weeks na wala pa yung parts. hindi pa daw napapadeliver. ngayon sobrang ingay na ng shocks ko. hindi ko magamit. please help me an aftermarket front shocks for chery QQ. Thanks in advance