Quote Originally Posted by archie123456789 View Post
what do you mean kailangan mo 100 watts? usually if 100 watts RMS bridged sa amp, you can power a set of speakers (seps or coax) at 100 watts or more. wag lang bababa sa 100 watts rms kasi baka sunugin mo yung mga speakers.

kung ano RMS rating ng coax, that is for the pair na, not just one speaker and same goes for the seps.

yung last question is for the set up already... ganto yan naman yan usually sa 4 channel amp 2 sets of speakers kaya niyan. either 2 seps, 2 subs, or 1 sub and 1 seps.

now if your amp is rated 100 watts * 4 channel malamang 50 watts bridged yan. so 50 watts sa isang seps and 50 watts for the sub. i does not mean your limited to buy 50 watts speakers. pwede ka bumili kahit 1000 watts speakers kaso hindi busog yung speakers. it still had the potential of giving more pero you have to get a high power amp.

ang magkasma lang sa rating is seps (high and mid). in short, hindi sila hiwalay

tapos iba naman subs (low)

basta power ng setup is though its ampli: the higher the ampli rating the higher components you need. for example 1600 rms watts yung ampli, 800 rms at bridged, kailangan mo ng malakas speakers that can handle that power or more. kung hindi, baka masunog speakers.

bossing salamat sa info...
bale ang tinutukoy ko na 100W eh sa speaker,, just in case sa mall ako bibili ng speaker...
para may idea ako kung ano ba talaga rating ang dapat kong piliin..

baka kasi mang mabili ko eh 100W seps+100W sub...
yun pala dapat eh 50W seps+50W sub or 100W 3-Way..

salamat....