Detailing Thread [For Newbies][continued 2]

[jed_015]

subukan mo pa ng ilang beses at baka makuha mo ang mainam na paggamit ng produkto, kundi ay marami nito ang maisasantabi at masasayang.

gamitin ang tire black pampaitim sa wheel wells pagkalinis nito

thank you sir! solid tagalog a..hehe..thanks!

[scharnhorst]

about dun sa microtex applicator..parang nahirapan akong gamitin..ginamit ko sa NXT e.. o baka hindi lang ako sanay..


mga sir/mam yung auto-gard na tire black ba is silicone based??yun kasi natanggap ko sa exchange gift e..e ang laki pa naman..kasi kung silicone based display nalang yun..hehe..thanks!

sir jed, transparent ba na gel?

malamang silicone yun parang yung rain harry.

mahirap gamitin sa paste yung microtex applicator, mas madali pa yung micromagic na foam applicators (yung 4 for 88)

[scharnhorst]

bro, every morning? ikaw ang idol ko and nakaka-inspire naman...alam mo balak ko rin yan gawin kaya lang in case..dust and apply QD sana kaso hindi ko magawa...

parang double purpose eto bro malinis na tsikot hindi pa male-late sa ofc...



thanks for the headsup paps...nagustuhan ko yung no buffing needed..kahit ba mapadami yung nalagay?

kasi with my experience with OID eh naghe-haze siya pag napadami yung application...


another question everyone on OCW, .how about kung medyo may kunting dust. ok lang ba apply yung OCW? or mas ok kung QD muna then apply OCW...

like in my case in the morning before going to ofc after dusting the car eh may hamog kaya hindi tanggal lahat talaga yung mga alikabok..

sa OCW, konti lang talaga ilalagay. may konting konting haze pag naparami, pero generally halos wala

to prep the car for OCW application:
1) use a duster (microtex or california)
2) QD+microfiber

just be aware, some QDs may be oily/greasy, hindi magbobond ang OCW pag ganun

[jed_015]

sir jed, transparent ba na gel?

malamang silicone yun parang yung rain harry.

mahirap gamitin sa paste yung microtex applicator, mas madali pa yung micromagic na foam applicators (yung 4 for 88)

sir scharnhorst opo e. transparent..baka sa wheel well ko nalang magamit..o kaya gagawin ko yung experiment na sinabi ni master ed..yung sa tsinelas?



sa NXT liquid ko nagamit sir..medyo nahihirapan ako.

[dandyagustin]

yesterday, Step 1 and Nano Glos
today, 476
No OCW yet and Nano Sliq

so far, the result is:

[scharnhorst]

*jed: display mo nalang, sir. hehe. baka malagyan paint mo, nakakastain yung mga ganung tireblack

iwas rin pala sa armor all for the interior

yesterday, Step 1 and Nano Glos
today, 476
No OCW yet and Nano Sliq

so far, the result is:

Nice detail sir!!!

maganda talaga ang nanoglos, hides the swirls. the 476 will protect everything underneath.

try to get OCW, nanosliq is good, but is harder to apply and it streaks.

yun lang pricepoint!

[dandyagustin]

*scharnhorst

thanks!

I will apply the OCW and Nano Sliq tonight or tomorrow na, under curing time pa ang 476 eh

[Chikselog]

Iba talaga pag itim.

Nice detail sir!

[Starex_Gold]

yesterday, Step 1 and Nano Glos
today, 476
No OCW yet and Nano Sliq

so far, the result is:

WHOA! :faint:

Good Job sir! [size=1]Damn I miss my FD....[/size]

[dandyagustin]

Iba talaga pag itim.

Nice detail sir!

haha.. panay naman linis sir pag itim