Detailing Thread [For Newbies][continued 2]

[indiej]

swirlx. you lube the clay and glide it. if you're squeezing it beneath your palm, you're pressing too hard.

[GulongGong]

just got my 476 from autobisyo today, instantly palit agad ako ng damit (yung pambahay na walang mga buttons at zipper) at diretcho hugas ng auto... (di masyado excited ) ...after washing and drying, ready na mag apply ng 476, medyo naintimidate ako kasi puro liquid wax lang ginagamit ko and years ago last time gumamit ng paste at sobrang parusa inabot ko.. hirap pala maalis nun.. kasi halos ginawa kong masilya yung wax sa kapal.. now with the 476 I made sure na di na maulit yun so dinahan dahan ko pag apply parang naglalagay ng makeup... (no experience sa actual makeup ha.. na imagine lang) ..the process went smoothly naman medyo tricky lang kasi yung kotse is white, so kailangan ko pang sipatin in different angles to make sure na napahiran na...

..ang tanong, what's more common scenario sa newbies applying paste waxes, yung masyadong makapal or masyadong manipis?... honestly di ko alam kung masyadong manipis yung lagay ko kasi hindi talaga ako nahirapan mag buff off unlike sa previous experience ko using paste wax.. after mag haze for a few minutes buff ko agad using microtex plush, one for each hand . no problems whatsoever. ganun ba talaga ang 476?

[indiej]

yung may training mag floor wax sa bahay o eskwelahan.. makapal mag wax

[dandyagustin]

already got the 476 from autobisyo and OCW from madkatz's bf.. thanks!
the products are complete:

Step 1
Nano Glos
476
OCW
Sliq

any additional reminders on applying the products?? thank you guys.. big fan of this thread!

[Chikselog]

already got the 476 from autobisyo and OCW from madkatz's bf.. thanks!
the products are complete:

Step 1
Nano Glos
476
OCW
Sliq

any additional reminders on applying the products?? thank you guys.. big fan of this thread!

Don't forget to follow the 4-8 hours curing time of waxes before applying another layer, and then you're good!

[georgeD]

already got the 476 from autobisyo and OCW from madkatz's bf.. thanks!
the products are complete:

Step 1
Nano Glos
476
OCW
Sliq

any additional reminders on applying the products?? thank you guys.. big fan of this thread!

sir, how much yung 476s at OCW? TIA

[dandyagustin]

sir, how much yung 476s at OCW? TIA

OCW - 1.2K but if you'll get the combo (ONR+OCW), 2K only
476 - 700

[dandyagustin]

Don't forget to follow the 4-8 hours curing time of waxes before applying another layer, and then you're good!

alright! thanks! we'll try the finger swipe test, tama ba?

[georgeD]

thanks dandy!

alright! thanks! we'll try the finger swipe test, tama ba?

finger swipe test is for the buffing time, while curing time is for next product application...

[dandyagustin]

thanks dandy!



finger swipe test is for the buffing time, while curing time is for next product application...

ok.. salamat din!!
again, for the curing time.. about the 476 and OCW, do they have curing time also like when using the Nano Glos?